Dmx-Controlled Operation; Addressing - EuroLite LED FX-250 User Manual

DMX-CONTROLLED OPERATION

You can control the devices individually via your DMX-controller. Every DMX-channel has a different
occupation with different features.
For DMX-controlled operation set DIP Switch 10 to ON.

Addressing

Each projector occupies 6 channels. To ensure that the control signals are properly directed to each
projector, the projector requires addressing. This is to be adjusted for every single projector by changing the
DIP-switches as set out in the table below.
The starting address is defined as the first channel from which the device will respond to the controller.
Please make sure that you do not have any overlapping channels in order to control each device correctly
and independently from any other fixture on the DMX data link. If two, three or more projectors are
addressed similarly, they will work similarly.
Occupation of the DIP-switches:
Controlling:
After having addressed all LED FX-250, you may now start operating these via your lighting controller.
21/43 00033218.DOC, Version 1.2