Fm Radio; Turn On Fm Radio; Automatically Scan; Manually Scan - Philips 5000 Series User Manual

6 FM radio

Turn on FM radio

Press button to select FM mode until the display
shows the FM frequency. Be sure to extend the
antenna on the back of the unit to strengthen the
reception effect.

Automatically scan

Long pressing button will automatically search for
FM channels. After searching �nished, the searched
channels will be saved automatically and the �rst saved
channel will be broadcast. Then press the
select scanned channel.

Manually scan

Press the / button to choose the channel by
manually.
7 DBB effect
Turn the speaker on and play audio, press the DBB
button on top panel to change the speaker bass
effect: DBB1/ DBB2/ DBB off.
Note
The speaker bass effect is set to DBB2 by default.

8 Record function

The speaker can record your Microphone or Guitar
audio to USB or TF device. Please note that
recording is only enabled when a USB or TF
device and a microphone or Guitar is attached.
To begin recording, the speaker can be in either
AUX, USB, TF or FM mode.
Record operation
Button & Operate
button to
Press
Press
Long press
In AUX mode, audio from Mic/ Guitar and
AUX input will be recorded.
In FM mode, audio from Mic/ Guitar and
FM radio audio will be recorded.
In USB or TF mode, only Mic/ Guitar input
will be recorded.
Insert your USB or TF device. The speaker
will create a directory called " Rec " in which
your recordings will be put.
The record function is not available in BT
mode.
Action
Start to record or stop
Record
recording and return to
the current source
Pause or resume the
recording
Play the record content,
or delete the record
Record
content when playing
the record content
Note
8 EN