Power On; Initial Settings Of Operation Panel - Sharp AL-800 Operation Manual
Sharp al-800: operation manual
Hide thumbs
Also See for AL-800:
- Operation manual (171 pages) ,
- Operation manual (49 pages) ,
- Operation manual (50 pages)
Table of Contents
Advertisement
POWER ON
Turn the power switch located on the left side of the copier, to the "ON" position. The ready
(
) indicator will light to indicate the ready condition and the other indicators will display the
initial settings of the copier. For initial settings, see the "Initial settings of the operation panel"
described below.
The copier will enter a power save mode once the set time has elapsed
without any copier operation after the last copy of a run is made or power is
turned on.
The settings of the power save modes can be modified. See page 26, USER
PROGRAMS.
The copier will return to the initial settings a preset amount of time after the
last copy is made. The preset amount of time (auto clear time) can be changed.
See page 26, USER PROGRAMS.
Initial settings of operation panel
The copier assumes the initial settings when the copier is turned on or a preset time (auto
clear time) elapses after the last copy is made. The initial settings of the operation panel are
shown below.
200%
MAX.
5
1
/
8
1
/
8
1
/
11
129%
x
x
2
2
2
100%
8
1
/
14
8
1
/
11
78%
x
x
2
2
8
1
/
11
5
1
/
8
1
/
64%
x
x
2
2
2
ZOOM
MIN.
50%
ON LINE
"0" is displayed in the
display.
2
17
Hide quick links:
Advertisement
Table of Contents
