Replacing the speakers
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
Procedure
NOTE: If the rubber grommets are pushed out when removing the speakers,
push them back in before replacing the speakers.
1
Using the alignment posts and rubber grommets, place the left speakers in the
slots on the palm rest and keyboard assembly.
2
Route the speaker cable through the routing guides on the palm rest and
keyboard assembly.
3
Replace the right speaker.
4
Connect the speaker cable to the system board.
Post-requisites
1
Replace the
solid-state
2
Replace the
base
3
Replace the
optical drive
66
computer. After working inside your computer, follow
After working inside your
drive.
cover.
(optional).
computer. For more safety best
www.dell.com/
Before