Status Indicators - Sharp AL-1451 Operation Manual

STATUS INDICATORS

When the following indicators light up or blink on the operation panel or the following alphanumeric
codes appear in the display, solve the problem immediately referring to both the table below
and the relevant page.
Be sure to use only genuine SHARP parts and supplies.
Indication
Drum replacement
required indicator
TD cartridge
replacement
required indicator
Misfeed indicator
SPF misfeed
indicator
"CH" is blinking in the display.
"CH" is steadily lit in the
display.
"P" is blinking in the display.
A letter and a number appear
alternately.
Cause and remedy
Steadily Replacement of drum cartridge will be needed
lit soon. Prepare a new cartridge.
Drum cartridge must be replaced. Replace it
Blinking
with a new one.
Replacement of TD cartridge will be needed
Steadily
soon. Prepare a new cartridge.
lit
TD cartridge must be replaced. Replace it with
Blinking
a new one.
A misfeed has occurred. Remove the misfed
paper referring to the description of "Misfeed
Blinking
removal."
An original misfeed has occurred in the SPF.
Blinking
Remove the misfed originals referring to the
description of "Misfeed in the SPF".
The TD cartridge is not installed. Check if the
cartridge is installed.
Side cover is open. Close the side cover
securely by pressing the round projections
near the side cover open button.
Paper tray or bypass tray is empty. Load copy
paper.
A misfeed has occurred in the paper tray or
bypass tray. Remove the misfed paper.
Paper tray is not securely installed. Push the
tray in securely.
The copier will not function. Turn the power
switch off, remove the power cord from the
outlet, and contact our Technical Assistance
Department at 1-(630)378-3590 in the USA or
1-877-SHARP-CC (toll free)/905-568-7140 in
Canada.
See
page:
43
28
43
27
33
6
37
27
–
13
33
–
–
39