Advertisement
Quick Links
Advertisement
Related Manuals for Manufacturas Lenin MLR-30
Summary of Contents for Manufacturas Lenin MLR-30
- Page 1 MLR-30 TORTILLA MACHINE OPERATION’S MANUAL MEXICANTORTILLAMACHINE.COM...
- Page 2 The total or partial reproduction of this manual is prohibited by any means, whether printed or electronic; without the prior, express and written authorization of the author. MLR-30 TORTILLA MACHINE OPERATION’S MANUAL MAY 2023...
-
Page 3: Table Of Contents
INDEX GENERAL SAFETY INSTRUCTIONS CAUTION GAS AND ELECTRICAL INSTALLATION COMPONENTS OPERATING INSTRUCTIONS CLEANING PROCEDURE LUBRICATION... -
Page 4: General Safety Instructions
MLR-30 TORTILLA MACHINE OPERATION’S MANUAL GENERAL SAFETY INSTRUCTIONS WARNING: To reduce the risk of injury, read all instructions properly. Failure to follow the instructions listed below can cause electric shock, fire, serious injuries, mutilation and/or damage to the equipment. A. SAFETY IN THE WORK AREA. -
Page 5: Caution
MLR-30 TORTILLA MACHINE OPERATION’S MANUAL CAUTION The following symbols indicate the safety measures that must be taken before and after starting up the equipment. HOT HAZARD Some parts of the machine are hot while in operation. TAKE CARE OF YOUR HANDS Hands should not be inserted while the machine is working. -
Page 6: Gas And Electrical Installation
MLR-30 TORTILLA MACHINE OPERATION’S MANUAL GAS AND ELECTRICAL INSTALLATION At the outlet of the gas tank, a model 10-080 high-pressure regulator must be installed, with a pressure gauge (0-7 Kg.) to verify the correct supply pressure. The pipe used for the connection is 3/4”of diameter, either L-type copper or 40-gauge black tubing. -
Page 7: Components
MLR-30 TORTILLA MACHINE OPERATION’S MANUAL COMPONENTS ROLLERS GRIDDLE ROLLER HEAD SLIDE HOOD TORTILLA RECEIVER... -
Page 8: Operating Instructions
MLR-30 TORTILLA MACHINE OPERATION’S MANUAL Connect to the gas outlet Plug the machine into an electrical outlet with the high pressure regulator Connect the gas intake to the inlet Check that the carburettor key is in position 0 of the carburettor valve. - Page 9 MLR-30 TORTILLA MACHINE OPERATION’S MANUAL Place the cutter on the base, verify that it is Spray grooves and belts with water to remove correctly installed and secured. excess product. Activate the oven engine start button (green) Pour graphite on the 3 levels of the oven.
- Page 10 MLR-30 TORTILLA MACHINE OPERATION’S MANUAL Turn the carburettor valve knob to adjust Ignite the nozzles with a torch. the intensity of the flame. Check the intensity of the flame Wait 3 minutes for the griddle to reach in the 3 levels of the oven.
- Page 11 MLR-30 TORTILLA MACHINE OPERATION’S MANUAL Adjust the thickness of the tortilla by turning Adhere curtain of dough to front roller. the adjustment knobs (clockwise thins the tortilla, counterclockwise thickens the tortilla) Release the cutter lever. Verify that the dough unsticks correctly.
-
Page 12: Cleaning Procedure
MLR-30 TORTILLA MACHINE OPERATION’S MANUAL CLEANING PROCEDURE WARNING: Cleaning both the rollers and the base must be done with the machine completely stopped to avoid accidents such as crushing. FRONT ROLLER CLEANING 1. Remove the dough residues from the front roller at total stop with your hands. -
Page 13: Lubrication
MLR-30 TORTILLA MACHINE OPERATION’S MANUAL LUBRICATION The following table shows the parts, the type of lubricant, and the frequency with which the machines and their parts must be lubricated. PART LUBRICANT PERIOD BAT 3 Grease 3 times per week Chains... - Page 14 MLR-30 TORTILLA MACHINE OPERATION’S MANUAL The following figures show the schematic location of the parts that require lubrication. Inject the lubricant into the bearing fitting. Lubricate sprockets, collars and gears Do not lubricate self-aligning bearings Inject the lubricant into the bearing fitting.
- Page 15 HEADQUARTERS AV. INDUSTRIAS #3665, ZONA INDUSTRIAL CP 78395 SAN LUIS POTOSÍ, SLP. MÉXICO 444 127 11 80 444 129 29 79 info@manufacturaslenin.mx MEXICANTORTILLAMACHINE.COM...
Need help?
Do you have a question about the MLR-30 and is the answer not in the manual?
Questions and answers