Table of Contents
Advertisement
VIPA HMI
Disable automatic log-in
HB160 | PPC | 67K-PNL0 | GB | 16-40
Operating system Windows Embedded Standard 7 > Structure
n
System properties
Via 'Start è Settings è System and Security è System' you
receive information about the version of the current Windows
operating system and the copyright.
Via 'System Protection' or 'Change settings' under 'Change' you
can change the device name that is shown during Ethernet com-
munication for instance.
n
Allow remote access
By default, remote access to the Panel PC is disabled. For
release, open the window 'Remote' via 'Start è Control Panel
è System and Security è System è Allow remote access',
choose one of the release options and confirm with [OK].
By default, the Panel PC automatically logs in with the user name
VIPA and the password vipatp. If the user needs to enter name and
password to use the Panel PC, the procedure is as follow:
1.
Type "cmd" under 'Start è Run'.
2.
In the next window type "control userpasswords2".
3.
In the opening dialog window check the box 'User must enter a
user name and password to use this computer.' and confirm
with [Apply]. You can also change the password in this section
under [Reset Password] at any time.
Deployment Panel PC
Ò
35
Advertisement
Table of Contents
