Entering A Serialize Label; Serialize - Brother P-touch PT-E300M User Manual

EDITING A LABEL
Numerically serialized labels can be printed. You can set the increment and count for the
series. In serialize mode, you can create a series of labels by incrementing one numeric
character in the pattern. In advanced serialize mode, you can choose simultaneous or
advanced. Simultaneous mode creates a series of labels by incrementing two different
numbers at the same time. Advanced mode creates a series of labels by allowing you to
select two sequences in the pattern and increment them consecutively.

Serialize

1
Enter text.
Example: Create a label "B010", "C010", "D010" from "A010"
by using this function.
3 2
Press the Serialize key and the screen to specify the range is
displayed.
3
Use the
character. Then position the cursor under the last character to be
incremented. Press OK or Enter key.
Example: Select A and press OK.
4
Select Increment and Count by using the
value by using the
Example: When you want to increase the number by one four
times, set Increment: 1, Count: 4.
5
Press the OK or Enter key to display the screen that you set.
Example:
• When you press the Serialize key, you can do the setting
again. After redo the setting, the message "OK to overwrite
the Data after This Position?" is shown. If it's ok to overwrite,
press OK key.
• You can select All/Current/Range when printing as there are
multiple pages of labels.
• To print labels refer to "LABEL PRINTING" on page 41.
31

Entering a Serialize Label

Entering a Serialize Label
, , or keys to position the cursor under the first
or key.
or key and set the