Clock And Daylight Saving Setting - Sanyo MVP-85 Instruction Manual

CLOCK AND DAYLIGHT SAVING SETTING

(CLOCK SET)
The default setting is as indicated below. The clock will start
after the actual time and date are set and the operations under
(DAYLIGHT SET) are completed.
Default clock settings: 01:01:2000 SAT 00:00:00
(January 1, 2000 at 00:00)
1
Press the MENU button 2 times to display the (CLOCK
SET) menu.
2
Example: Setting the clock to October 15, 1999 at 3:20 PM
1 Press the + (or –) button to set the month (10), then
press the c button.
2 Press the + (or –) button to set the day (15), then press
the c button.
3 Press the + (or –) button to set the year (1999), then
press the c button.
4 Press the + (or –) button to set the hours (15), then
press the c button.
5 Press the + (or –) button to set the minutes (20), then
press the c button.
NOTE: The day of the week (SAT) will be automatically set
according to the date entered.
3
Press the l button to go to the (DAYLIGHT SET).
Press the MENU button to go to the next menu
screen, or
Press the EXIT button to exit the menu display.
2-
1
(CLOCK SET)
10-01-2000 SAT 00:00:00
QUAD VCR
NOTE: To set the display mode for the clock, refer to
"DISPLAY SET (CLOCK, TITLE)" on page 22.
(DAYLIGHT SET)
The default daylight saving time function setting is "NO USE", so
the daylight adjustment will not be made.
If the unit will be used in an area where there is a daylight saving
time change, set it to "USE", then if necessary, set when the
daylight saving time is changed.
The default settings are:
Daylight saving time from the first Sunday of April, at 2:00 AM
(1ST-SUN 04 02:00) to last Sunday of October, at 2:00 AM
(LST-SUN 10 02:00).
English
2-
2~5
(CLOCK SET)
10-15-1999 FRI 15:20:00
LIVE
QUAD
17
TO MAKE CHANGES TO THE SETTINGS
1
Press the l button to highlight the NO USE setting,
then press the + (or –) button to select "USE", and
press the l button one more time.
2
Example: Setting the daylight saving time from the
second Tuesday of May at 3:00 AM, to the
fourth Tuesday of September at 3:00 AM.
1 Press the + (or –) button to set the WEEK (2ND), then
press the c button.
Menu: 1ST, 2ND, 3RD, 4TH or LST (first, second, third,
fourth or last)
2 Press the + (or –) button to set the WEEK (TUE), then
press the c button.
Menu: SUN, MON, TUE, WED, THU, FRI, SAT or SUN
3 Press the + (or –) button to set the MON (05), then press
the c button.
Menu: 1, 2, 3, 4 ..... 11, 12
(for January, February, March ..... December)
4 Press the + (or –) button to set the TIME (03), then press
the c button.
•
Following the same procedure as above, set when the
time is changed back from daylight saving time to
standard time (the OFF settings).
3
Press the MENU button to go to the next menu
screen, or
Press the EXIT button to exit the menu display.
1
(DAYLIGHT SET)
MODE USE
WEEK MON TIME
ON 1ST-SUN 04 02:00
OFF LST-SUN 10 02:00
QUAD
2-
2
(DAYLIGHT SET)
MODE USE
WEEK MON TIME
ON 2ND-TUE 04 02:00
OFF LST-SUN 10 02:00
QUAD VCR
2-
4
(DAYLIGHT SET)
MODE USE
WEEK MON TIME
ON 2ND-TUE 05 03:00
OFF LST-SUN 10 02:00
QUAD LIVE
Menu 2
2-
1
(DAYLIGHT SET)
MODE USE
WEEK MON TIME
ON 2ND-SUN 04 02:00
OFF LST-SUN 10 02:00
LIVE QUAD VCR
2-
3
(DAYLIGHT SET)
MODE USE
WEEK MON TIME
ON 2ND-TUE 05 02:00
OFF LST-SUN 10 02:00
QUAD VCR