Table of Contents
Advertisement
Symptom
Adjust the volume knob on
No sound.
the connected car stereo.
The power cord is not con-
The connection cords are
not connected properly.
The built-in microcomputer
The operation
keys do not work.
is operating incorrectly due
to noise.
The installation angle is
Sound skips.
greater than 30".
The disc player is not
installed correctly.
The compact disc is extreme-
Condensation
The compact disc is defec-
The sound quality
tive.
is poor.
The compact disc is dirty.
All manuals and user guides at all-guides.com
Cause
Solution
Turn the volume adjustment
knob to adjust the sound to
the level you want.
Double check the power
cord.
Check the speaker cords and
the other connection cords.
Remove the compact disc,
then insert it again.
Press the reset button.
Adjust the angle to less than
Fasten the disc player
securely.
Clean the compact disc, try
to play the new one.
Leave the disc player off for
an hour or so, then try again.
Try another disc.
If that disc plays properly,
the first disc is defective.
Clean the disc as explained
on page 10.
Advertisement
Table of Contents
