Table of Contents
Advertisement
e.g.
When preset button is pressed.
When BND/LOUD/ENTER button is pressed.
When AS/PS/P.SCAN button is pressed.
-
BEEP ALL mode:
The beep is generated when every button is pressed.
-
BEEP OFF mode:
The beep is disabled.
MODE SELECTION...................................... ... ..... .....(4)
Press MOD button (4) to choose desired listening mode. (e.g. radio mode to SIRIUS mode to CD
mode to CDC (or AUX) mode)
DISPLAY INFORMATION..................... ... ... ... ... ... ....(5)
When pressed quickly, the DSP button (5) changes the display as follows.
-
In AM/FM mode:
-> Frequency ->CLOCK ->
-
In Sirius mode:
-> Channel Name -> Song Title -> Artist Name -> Category Name -> CLOCK ->
-
In CD mode:
-> CD ->CLOCK ->
-
In CDC (or AUX) mode:
-> CDC (or AUX) ->CLOCK ->
Each display time is 5 seconds, the display will return to the first position after 5 seconds.
SET THE CLOCK... ... ... ... ... ............................(5),(8),(9)
Press the DSP button (5) to show the clock on the LCD display. Then hold the button until the
clock flashes. During this mode, press the MANU/SKIP
MANU/SKIP
button (9) to change minutes.
LOUDNESS EFFECT...................................... ... ..... ..(6)
Press BND/LOUD/ENTER button (6) for several seconds to reinforce the bass output. Press it
for several seconds again to release this function.
EQUALIZATION......................... ... ............... ... ... ... ..(7)
Press EQ button (7) to turn on equalization function and to select desired audio mode. There are
five kinds of modes as below:
FLAT
MUTE FUNCTION...................................... ... ..... .... (10)
Press MUT button (10) to mute down the sound instantly. If any button is pressed in the mute
state, the mute state is released.
CLASSICS
POP M
7
button (8) to change hours or
ROCK M
DSP OFF
Advertisement
Table of Contents
