VBA29001-R.3814.A
8..Image.Sensor/TOGO.PCB
Image.sensor.unit
・ Mount the image sensor unit (#B20051).
・ Tighten the three screws (#678).
Caution:.For.some.camera.bodies,.washers.are.already.attached.on.the.face.that.is.for.mounting.
the.image.sensor.unit.
#678×3
#B20051
Direction.for.positioning
・ Arrange the wires as below, and secure them with the three pieces of the tape [TA-0016 (8×8)].
・ Connect.the.harness.
TA-0016 (8×8)×3
- A69 ・ D7000 -
NICS
Need help?
Do you have a question about the D7000 and is the answer not in the manual?
Questions and answers