Voice Alarm Timer - Sanyo ICR-B150 Instruction Manual

VOICE ALARM TIMER

1. Set the ALARM ON, date, and time.
(See "Selecting the menu" and "Various menu modes" in "SELECTING
THE FOLDER AND MENU" on pages 9 ~ 12.)
2. Press the MENU/FOLDER button repeatedly to select "FOLDER
ALARM".
3. Slide the operation switch to the DICT position.
4. Record your message into the ALARM folder (only one message).
Example:
ALARM
0:01
When the alarm ON time arrives, the voice alarm will be activated as shown
below:
In the stop or power off mode:
• Voice message (If voice message is recorded.)
• Beep 5 times (If no voice message is recorded.)
During playback mode:
The operation is the same as "At the stop or power off mode" as above. And
it goes back to the previous point and resumes playback.
During recording mode:
No sound ("
25
" blinks on the display.)