Intel ® Virtual Raid On Cpu In Uefi Bios - Asus WS C422 SAGE/10G Manual

4.1.4 Intel
This feature requires a KEY module to enable CPU RAID functions with Intel
•
•
•
•
To enter the Intel
®
1. Enter the BIOS Setup during POST.
2. Go to the Boot menu > CSM (Compatibility Support Module) > Launch CSM, then
set the item to [Disabled].
3. Go to the Advanced menu > CPU Storage Configuration, then set the PCIE slot(s) that
you have installed the storage devices to [Enabled].
4-6
Virtual Raid on CPU in UEFI BIOS
®
The KEY module is purchased separately.
Refer to section 1.1.9 Internal connectors for the location of the VROC_HW_KEY
connector.
Due to hardware design, CPU RAID configuration as OS drives is only supported in
the following configuration sets and cannot be created across different sets:
[Set 1] M.2_1, U.2_1, and U.2_2.
[Set 2] PCIEX16_1 to PCIEX16_3.
[Set 3] PCIEX16_4 to PCIEX16_7.
Due to hardware design, RAID Volume between M.2_1 and M.2_2 is not supported.
Virtual Raid on CPU in UEFI BIOS:
CPU RSTe.
®
Chapter 4: RAID Support