Operating The Appliance; Preparing The Washing Machine; Switching On The Appliance/ Selecting A Programme; Change The Programme Default Settings - Bosch WMH6Y790GB Instruction Manual And Installation Instructions

Operating the appliance

en
1
Operating the
appliance
Preparing the washing
O p e r a t i n g t h e a p p l i a n c e .
machine
The washing machine must be
Note: .
correctly installed and connected.
From ~ Page 14
Plug into the mains.
1.
Turn on the tap.
2.
Open the washing machine door.
3.
Check that the drum is completely
4.
drained. Drain if necessary.
Otherwise, the load display may
malfunction. ~ Page 55
Switching on the appliance/
selecting a programme
Press the # button. The appliance is
switched on.
The Siemens logo appears on the
display and all indicator lamps light up.
The Cotton programme set at the
factory is then always displayed.
You can:
use this programme or
■
select another programme on the
■
control panel or
select a programme under Others.
■
~ Page 27
If you have activated the
Note: .
childproof lock, you must deactivate it
before you can set a programme.
~ Page 46
42
The indicator lamp on the programme
selector lights up and the main menu
with the programme default settings
for the selected programme appear on
the display panel: ~ Page 27
Temperature,
■
Spin speed,
■
Programme duration,
■
Any additional settings and
■
Information on water and energy
■
consumption. ~ Page 13
In appliances with a drum light:
The drum is lit after switching on the
appliance, after opening and closing the
door and after starting the programme.
The light switches off automatically.
You can:
use the programme default settings
■
and load laundry ~ Page 43,
or change the programme default
■
settings and/or select additional
settings.
Change the programme
default settings
You can use or change the default
settings for each washing cycle.
To do this, repeatedly press the
corresponding button until the required
setting is displayed. ~ Page 27
Pressing and holding the
Note: .
buttons automatically runs through the
set values.
The settings are activated without
needing to be confirmed.
The settings are not saved after the
washing machine is switched off.
Programme default settings
~ Page 38