VOR Function
With the VOR (Voice Operating Record) function enabled, the recorder can record only when it detects a
voice or other sound; otherwise it remians in the pause state.
To set VOR
Vor On
Slide the
Mic Mode Select Function
You can adjust the microphone's sensitivity according to its distance from the sound source, and the amount
of ambient noise.
Meeting mode
Use this when the sound source is
close to the microphone or when the
noise level is high.
Slide the Mic Mode switch down.
Recording Mode Select Function
Using the Rec Select switch, select the desired recording mode.
SHQ mode: super high
quality recording
When you select a recording mode, the selection appears on the display.
switch up.
HQ mode: high quality recording
To cancel the VOR function
Vor On
Slide the
switch down.
Lecture mode
Use this when the sound source is far
away or when the noise level is fairly
low.
Slide the Mic Mode switch up.
SP mode: recording
12