Air Conditioner Maintenance - NewTek NT-65M07 Instruction Manual

With the button «РЕЖИМ» select the mode COOL or
-
НЕАТ.
Use the "<" and ">" buttons to set the temperature in
-
the range 16-32 °C.
In AUTO mode, the temperature is set automatically
-
and is not set from the remote control.
With the button «СКОРОСТЬ» set the desired fan
-
rotation mode: AUTO, HIGH (high speed), MID (medium
speed), LOW (low speed).
Use the button "ЖАЛЮЗИ" to set the desired position
-
of the blinds. To enable functions ECO, "ДЕТИ", «ТАЙ-
МЕР», «ТУРБО», «ДИСПЛЕЙ» click the appropriate
button.
REPLACING THE BATTERIES ON THE REMOTE CONTROL
Slide the cover from the back of the remote control
-
by pressing a special lever.
Insert two AAA alkaline batteries, make sure they
-
are inserted in accordance with the specified
direction.
Press the ON/OFF button of the device.
-
Note:
Replace the batteries if the LCD display of the
-
remote control does not light up or when the remote
control cannot be used to change the settings of the
air conditioner.
Use new AAA batteries.
-
If you have not used the remote control for more
-
than a month, remove the batteries.
35
AIR CONDITIONING CONTROL WITHOUT REMOTE CONTROL
If you have lost the remote control or it is faulty,
follow these steps:
1. If the air conditioner is not working. If you want
to start the air conditioner, press the emergency
power button on the indoor unit (before that,
carefully lift the front panel).
2. If the air conditioner is working. If you want to
turn off the air conditioner, press the emergency
shutdown button on the indoor unit.
Note: do not keep the buttons pressed for a long time,
this may cause the air conditioner to malfunction.

5. AIR CONDITIONER MAINTENANCE

Disconnect the AC from power supply before
performing any maintenance operations.
INDOOR UNIT FRONT PANEL MAINTENANCE
Careful maintenance and regular cleaning will help
extend the service life of the appliance and reduce
power consumption.
Observe the following suggestions when cleaning the
appliance:
– do not stand on an unstable surface when wiping
the appliance; you may fall down and injure yourself
and damage the appliance;
– do not touch the metal parts of the housing when
removing the front panel to avoid injury;
– use a dry cloth to clean the front panel and the RC
unit, if the contamination will not come off use a
damp cloth.
Note:
– Do not submerge or wash the appliance and the RC
unit in water!