Table of Contents
Advertisement
MCD-HM920(GB)
6/27/03 14:24
Page 11
Preparation before
using your unit
Using standard batteries
1
Attach the external battery pack as
shown in the picture.
2
Open the cover of the battery
compartment.
3
Carefully check the correct orientation
of the positive and negative terminals
of the batteries.
• Use two AA/LR6 type 1.5 V batteries.
Use two AA/LR6 alkaline batteries.
Manganese batteries have a shorter battery life.
Battery Life
(Using alkaline batteries)
Rechargeable
Batteries
MP3(WMA)-CD
11 hours
30 minutes
CD (when Anti Shock 160 seconds is on) 6 hours
30 minutes
•
The battery life-time is based on continuous use.
•
These AA/LR6 batteries are alkaline batteries.
Time for
•
Replace the batteries if the remaining battery power indicator "
Battery
•
Even though the remaining battery power indicator "
Replacement
if the batteries have already expired, the LCD remote control will not be lit.
•
The external battery pack cannot charge, as it does not have the
Warning
capacity to charge.
•
Do not mix old and new batteries.
11
•
Remove the batteries if they will not be used for a long time.
•
Remove the standard batteries when you use an AC adapter.
•
Standard batteries cannot be recharged.
(not supplied)
Rechargeable Batteries +
Battery Pack (type AA/LR6)
26 hours
14 hours
" flashes.
" may be flashing,
CD Playback
1
Slide the OPEN button to
open the door.
Insert a CD.
• Push the door to close it.
2
Press the Play/Pause
( √» ) button.
• Once the CD is
recognized, playback
commences.
3
To stop playback, press
the STOP ( ) button.
• Press the STOP ( )
button again to switch
off the unit.
• The power will automatically switch
off after 15 seconds, even if you
do not press the STOP ( ) button.
To temporarily pause playback
Press the Play/Pause ( √» ) button.
•
Playback will be temporarily suspended.
√»
•
Press the Play/Pause (
) button again to resume
playback.
normal
esp Flat
01
03 : 20
CDDA Disc
Track Number Indicator
Playtime Indicator
12
Advertisement
Table of Contents
