Lenovo ideapad 310-14IAP User Manual page 39

5 Remove DDR3L module by pulling out on the latches on both edges of
the socket at the same time. Be sure to save the old DDR3L for future use.
6 Align the notch of the DDR3L module with the protrusion of the socket
and gently insert the new module at a 30-45° angle.
7 Push the DDR3L module down until the latches on both sides of the
socket lock into its position.
8 After aligning the attachment clips with their matching gaps, reinstall the
memory/Mini PCI Express Card slot compartment cover.
9 Tighten the screw.
0 Turn the computer over again.
A Connect the AC power adapter and the cables to the computer.
1
b
Appendix A. CRU instructions
2
a
1
35