LEANING LADDER GUIDE IMPORTANT - Every month, more than a thousand people need hospital treatment because of accidents at home involving ladders... ABOVE ALL BE CAREFUL EN131 WARNING! Ladder suitable for Fall from the ladder Professional Use BEFORE USE Do not use the ladder if contaminated, •...
Page 4
LEANING LADDER GUIDE Do not erect ladder on Leaning ladders with steps, • • contaminated ground . shall be used that the steps Ladders shall not be are in a horizontal position . positioned on slippery surfaces (such as ice, shiny surfaces Secure ladder at the top and bottom •...
Page 5
LEANING LADDER GUIDE • Do not stand on the last • Do not use the ladder as a metre of a telescopic ladder bridge . • Do not overreach, user • Do not bring your hands/ should keep their belt buckle fingers in rung area (area (navel) inside the stiles and of shearing) when bringing...
STABILISER ASSEMBLY For the 3.2m or 3.8m model that is supplied with a stabiliser bar - DO NOT use the ladder until the stabiliser bar has firstly been fully assembled and secured to the ladder. 1. CONTENTS B Push-on End D Ø3x15 A Stabiliser C M8x25...
OPERATING GUIDE IMPORTANT – Read all instructions carefully before setting up and using the ladder. The ladder should be inspected after delivery and before every use to confirm condition and operating of all parts. Place the ladder with both feet on the If you do not intend to use the entire ground such that you are facing the length of the ladder, extend the ladder...
Page 9
OPERATING GUIDE Note the sloped shape of the ladder feet and To close the ladder, support the ladder location of the wall bumper square pads and in an upright position with one hand and then place the extended ladder forwards depress and then release both ladder and at an angle of 75 degrees to the ground lock release buttons with the other hand .
LADDER SAFETY CHECK IMPORTANT – Professional users and equipment providers to professional users (e.g. employers) should engage in proper training such as the ladder association ladder inspection course. Please contact the customer helpline on 01621 745 900 for more information. 1.
. processes performed by or on behalf of Werner UK Sales & Distribution Ltd . in • Damage caused by failure to order to manufacture the product . comply with all written warnings and instructions for the product .
Need help?
Do you have a question about the 85026 and is the answer not in the manual?
Questions and answers