Related Manuals for Sena SRL2
Summary of Contents for Sena SRL2
- Page 1 SRL2 Motorcycle Bluetooth ® Communication System for Shoei Helmets User’s Guide www.sena.com...
- Page 2 WARNING To minimize the risk of serious injury, death or product damage, read this User's Guide and the Quick Start Guide before using the product for the first time. Go to sena.com to access these documents if they are missing or unreadable. Keep both Guides for future reference.
-
Page 3: Table Of Contents
4.3 Bluetooth Stereo Device Pairing ...................19 4.4 Bluetooth GPS Navigation Pairing ..................19 11.1 Voice Command Setting (Default: Enable) ................32 4.5 Pairing with the Sena SR10, Bluetooth Two-way Radio Adapter .........21 12 INTERCOM PAIRING .................... 32 PAIRING WITH SELECTIVE PROFILE: A2DP STEREO OR HANDSFREE ..22 12.1 Pairing with Other SRL2 Headsets for Intercom Conversation ..........32... - Page 4 SRL2 16 UNIVERSAL INTERCOM ..................39 23 RESET TO FACTORY DEFAULT SETTINGS ............50 16.1 Universal Intercom Pairing ....................39 24 FAULT RESET ....................... 51 16.2 Two-way Universal Intercom ....................40 16.3 Three-way Universal Intercom ....................40 25 FIRMWARE UPGRADE ..................52 16.4 Four-way Universal Intercom ....................41 26 OPERATION QUICK REFERENCE ..............
-
Page 5: Safety Precautions
SRL2 • When relevant, follow all regulations regarding the use of the camera. Safety Precautions (1) Do not use your camera in an aircraft, unless permitted. (2) Turn off the camera when you are near medical equipment. Your camera can cause interference with medical devices in hospital or healthcare facilities. - Page 6 SRL2 Battery CAUTION Your product has a built-in battery. Be careful to heed all safety information in this guide. • If the product emits an unusual smell, feels hot, or appears abnormal in any other way Failure to carefully observe the safety precautions can cause battery heat generation, while using or charging, stop using it immediately.
- Page 7 SRL2 Product Storage and Management • Do not store the camera in proximity to magnetic fields. Doing so may result in camera malfunction. Take the following precautions to avoid personal injury or damage to your product while • Be careful to protect the lens by avoiding rough handling or physical shock.
-
Page 8: Package Contents
SRL2 Wired Boom Microphone for Flip Up Helmets 1 PACKAGE CONTENTS • Wired Boom Microphone • Headset Main Unit • Microphone Sponges (2) Wired Microphone for Full Face Helmets • Wired Microphone • Hook and Loop Fastener for Wired Microphone... -
Page 9: Installing The Srl2 On Your Helmet
SRL2 compatible SHOEI helmets can be found by scanning the QR code of the product box. 2.1 Flip Up Helmet Installation To securely install the SRL2 on the flip up helmet, please follow this procedure. Speaker 2. Push the tab on the right cover with your thumb. - Page 10 SRL2 3. While pushing the tab, insert the service tool into the groove and 6. Detach the snap fasteners of the internal paddings and remove push to remove the cover. the paddings from the helmet. 2.1.2 Installing the headset 4. Repeat the process on the other side to remove the left cover.
- Page 11 SRL2 2. Facing the USB port on the Bluetooth module toward the rear of 6. Slide the left and right clips into their corresponding sides the helmet, push the module into the corresponding slot until you between the external shell and the inner shell.
-
Page 12: Full Face Helmet Installation
SRL2 2.2 Full Face Helmet Installation 2.2.1 Preparing the helmet for installation To securely install the SRL2 on the full face helmet, please follow this 1. Push the tab on the right cover with your thumb. procedure. Speaker (-) Button Center Button 2. - Page 13 SRL2 2.2.2 Installing the headset 4. Push the tab on the rear cover and remove the rear cover with your thumbs. 1. Align the arrows on the right side speaker unit with the microphone cable and insert the microphone cable into the microphone connector.
- Page 14 SRL2 3. Insert the helmet speakers into the grooves in the inner shell of the helmet. 6. Repeat the process on the other side to install the button module. 7. Slide the left and right clips into their corresponding sides 4.
-
Page 15: Getting Started
Button at the same time for 1 second. When powering off the headset, Any 3rd party USB charger can be used with Sena products if the charger tap the Center Button and the (+) Button at the same time until the red... -
Page 16: Checking The Battery Level
SRL2 3.4 Checking the Battery Level 3.4.2 Voice Prompt Indicator You can check the battery level in two different ways when the headset When you power on the headset, press and hold the Center Button is powering on. and the (+) Button for more than 6 seconds until you hear three, high- toned beeps. -
Page 17: Software
The Sena Motorcycles App allows you to configure the device settings, create groups of intercom friends, and view the quick start guide. Simply pair your phone with your SRL2 headset, run the Sena Motorcycles App and you can configure its settings directly from your smartphone. -
Page 18: Mobile Phone Pairing
4.2 Second Mobile Phone Pairing Typical Bluetooth headsets can connect with only one Bluetooth 1. Turn on the SRL2 and press the Center Button for 12 seconds until device, but a second mobile phone pairing allows the headset to you hear high-toned double beeps. You will hear a voice prompt connect with another Bluetooth device such as a second mobile saying “Configuration menu”. -
Page 19: Bluetooth Stereo Device Pairing
3. Search for Bluetooth devices on the GPS navigation screen. such as smartphones, you don’t need to pair the SRL2 with it Select the Sena SRL2 in the list of the devices detected on the separately. When the SRL2 is paired with the mobile phone, it is GPS. - Page 20 Smart Phone phone bridging over Bluetooth, you can pair the mobile phone to the GPS to use your mobile phone. When you do this, the SRL2 thinks the Mobile Phone GPS is a mobile phone so you can no longer pair your mobile phone...
-
Page 21: Pairing With The Sena Sr10, Bluetooth Two-Way Radio Adapter
If you pair the SRL2 with an SR10 by second connected to the SR10 by a wire. The GPS voice instruction or the mobile phone pairing, the SRL2 is able to have two HFP devices at the radar detector alarm is also heard in the background via the SR10 same time: a mobile phone and the Sena SR10. -
Page 22: Pairing With Selective Profile: A2Dp Stereo Or Handsfree
Second Mobile Phone Pairing SRL2 SRL2. To clear the pairing list on SRL2, please do a factory reset or Sena SR10 follow the pairing list clearing procedure described in this manual. To clear the pairing list on the mobile phone, please refer to the mobile... -
Page 23: A2Dp Stereo Music Only
3. Search for Bluetooth devices on your smartphone. Select the answer the call. Sena SRL2 in the list of devices detected on your phone. 2. You can also answer the incoming call by loudly speaking any 4. Enter 0000 for the PIN. Some smartphones may not ask for PIN. -
Page 24: Speed Dialing
1. To enter into the voice speed dial menu, press the (+) Button for 2. Speed dial needs to be setup through the Sena Motorcycles App or the 3 seconds and you will hear a mid-toned single beep and a voice Sena Device Manager first. -
Page 25: Stereo Music
7.1 By Bluetooth Wireless Stereo Speed Dial Press the (+) Button for 3 seconds The Bluetooth audio device must be paired with the SRL2 by following Voice Dial Press the Center Button for 3 seconds the “Bluetooth Stereo Device Pairing” procedures described in the section 4.3 . -
Page 26: Music Sharing
7.3 Smart Volume Control (Default: Disable) You can start sharing music with an intercom friend using Bluetooth You can enable or disable Smart Volume Control through the Sena stereo music during a two-way intercom conversation. Device Manager or the Sena Motorcycles App. Enabling Smart Volume Control automatically changes the level of the speaker volume based 1. -
Page 27: Gps Navigation
8 GPS NAVIGATION 9 SENA SR10, TWO-WAY RADIO ADAPTER If you pair a Bluetooth GPS to the SRL2 as described in section 4.4, As described in section 4.5 , you can use a two-way radio and the “Bluetooth GPS Navigation Pairing” , you can hear the voice instruction SRL2 Bluetooth intercom simultaneously by using the Sena SR10, a of the GPS while having an intercom conversation. -
Page 28: Fm Radio
Connection Connection (-) Button for 1 second until you hear a voice prompt saying “FM off”. When you power it off, the SRL2 will remember the last station Audio from Audio from frequency. When you power it on and turn on the FM radio, the last... -
Page 29: Scan And Save
1. You can save FM stations to presets before using FM radio. Connect the SRL2 to your PC and open the Device Manager. It allows you to save up to 10 FM station frequency presets on the SRL2 settings menu. You may do the same operation by using the Sena Motorcycles App. -
Page 30: Temporary Preset
10.7 RDS AF Setting (Default: Disable) With the temporary preset function, you may temporarily preset You can enable or disable RDS AF setting through the Sena Device stations automatically without changing the existing preset stations. Manager or the Sena Motorcycles App. RDS AF allows a receiver to... -
Page 31: Voice Command
11 VOICE COMMAND “Intercom Start/End each intercom [one, two, … , nine]” The voice command of the SRL2 allows you to operate certain End all intercoms “End intercom” operations by simply using your voice. You can control the SRL2 Call last intercom “Last intercom”... -
Page 32: Voice Command Setting (Default: Enable)
The SRL2 can be paired with up to nine other headsets for Bluetooth Stop music / FM Radio “Stop” intercom conversation. 1. Turn on the two SRL2 headsets (A and B) that you would like to Note: pair with each other. 1. Voice command performance may vary based on the environmental 2. -
Page 33: Pairing With Other Sena Headset Models For Intercom Conversation
12.2 Pairing with Other Sena Headset Models for Intercom Conversation The SRL2 can be paired with all other Sena headset models such as the SMH10 and the SMH5 for an intercom conversation. Please follow the same procedure as above to pair with these headset models. -
Page 34: Two-Way & Multi-Way Intercom
13.2.1 Start Three-way Intercom second to end any intercom, or use the voice command, “End You (A) can have a three-way intercom with two other SRL2 friends (B intercom”. Or, you can single tap to end intercom with the first &... - Page 35 2. Start an intercom conversation with one of the two friends in your intercom group. For example, you (A) may start an intercom 4. Now you (A) and two SRL2 intercom friends (B & C) are having a conversation with the intercom friend (B). Or intercom friend (B) three-way intercom.
- Page 36 13.2.3 Start Multi-way Intercom When you are a member of an active three-way intercom, you can You can have multi-way intercom with up to seven other SRL2 users by completely terminate the intercom or just disconnect an intercom creating an intercom chain. Both the head and the tail of the chain can connection with one of your active intercom friends.
- Page 37 SRL2 13.2.4 End Multi-way Intercom For example, if you have a three-way intercom set up, the new participant (D) can be added to either (B)-the head, or (C)-the tail. If You can completely get out of the multi-way intercom or just disconnect (D) were added to (C), then (D) becomes the new tail of the chain.
-
Page 38: Three-Way Conference Phone Call With Intercom Participant
SRL2 14 THREE-WAY CONFERENCE PHONE CALL WITH INTERCOM PARTICIPANT You can have a three-way conference phone call by adding an First Friend Second Friend intercom friend to the mobile phone conversation. While having a mobile phone call, make an intercom call to one of the intercom friends... -
Page 39: Group Intercom
Bluetooth handsfree profile. want to group with. 3. Check your friends and press ‘Save to My SRL2’ on the screen. 16.1 Universal Intercom Pairing 4. Press 'Connect' on the screen or tap the (+) Button and the (-) The SRL2 can be paired with non-Sena Bluetooth headsets for Button simultaneously to begin Group Intercom. -
Page 40: Two-Way Universal Intercom
SRL2s and one non-Sena Bluetooth headset. Button to enter into Universal Intercom Pairing mode and the blue 1. You (A) need to be paired with a non-Sena Bluetooth headset (B) LED will flash rapidly and you will hear multiple beeps. Please and another SRL2 headset (C) for the three-way intercom. -
Page 41: Four-Way Universal Intercom
SRL2 16.4 Four-way Universal Intercom 3. The other SRL2 (C) may join the intercom by making an intercom call to you (A). You may make a four-way Universal Intercom connection with a couple of different configurations, 1) three SRL2s and one non-Sena Bluetooth headset or 2) two SRL2s and two non-Sena Bluetooth headsets. - Page 42 SRL2 2. The other SRL2 (C) may join the intercom by making an intercom 4. Now two SRL2 headsets (A & C) and two non-Sena Bluetooth call to you (A). headsets (B & D) are connected with the four-way Universal Intercom.
-
Page 43: Additional Intercom Settings
17 ADDITIONAL INTERCOM SETTINGS You can enable or disable Audio Overlay Volume Management through the Sena Device Manager or the Sena Motorcycles App. The music, FM radio and GPS overlaid audio reduces in volume whenever there is 17.1 Audio Multitasking™ (Default: Enable) an ongoing intercom conversation. -
Page 44: Eight-Way Intercom (Default: Disable)
Note: section 22.7, “Remote Control Pairing” . If you use your SRL2 with the Bluetooth Audio Pack for GoPro, you can 3. Enter pairing mode in the Remote Control device. The Bluetooth enable or disable this feature only during Normal Voice Recording. This... -
Page 45: Function Priority
20 VOICE PROMPT The SRL2 operates in the following order of priority: Voice Prompt is enabled by default. You can disable voice prompts through the Sena Device Manager or the Sena Motorcycles App, but (highest) Mobile phone the following voice prompts are always on. -
Page 46: Sidetone
Center Button, or disable the feature by tapping the Center Button. 4. If any button is not pressed within 10 seconds, the SRL2 will exit the configuration and go back to stand-by. 5. If you want to exit the configuration immediately, tap the (-) Button and you will hear a voice prompt, “Exit configuration”, and tap... -
Page 47: Phone Pairing
SRL2 22.1 Phone Pairing The voice prompt for each menu item is as below: (1) Phone pairing (6) Delete all pairings Voice Prompt "Phone pairing" (2) Second mobile phone pairing (7) Remote control pairing Factory Default (3) GPS pairing (8) Universal intercom pairing... -
Page 48: Gps Pairing
To go into phone selective pairing mode, tap the (+) Button or the (-) Button until you hear the voice prompt, “Phone selective pairing”. To delete all Bluetooth pairing information of the SRL2, tap the (+) Please refer to section 5.2, “HFP for Phone Call Only” for details on Button or the (-) Button until you hear a voice prompt, “Delete all... -
Page 49: Remote Control Pairing
Tap the Center Button To enter into Remote Control Pairing mode, tap the (+) Button or the (-) To restore factory default settings on the SRL2, tap the (+) Button or Button until you hear a voice prompt, “Remote control pairing”. Then the (-) Button until you hear a voice prompt, “Factory reset”, and tap... -
Page 50: Reset To Factory Default Settings
Phone Pairing None Second Mobile Phone Pairing None 1. To restore the SRL2 to factory default settings, press the Center GPS Pairing None Button for 12 seconds until you hear high-toned double beeps. You will hear a voice prompt saying “Configuration menu”. -
Page 51: Fault Reset
24 FAULT RESET The charging LED is not a pin-hole reset button. Do not press it. When the SRL2 is not working properly or is in faulty status for any reason, you may reset by pushing the pin-hole reset button located next to the DC Power Charging &... -
Page 52: Firmware Upgrade
SRL2 25 FIRMWARE UPGRADE 26 OPERATION QUICK REFERENCE The SRL2 supports firmware upgrade function. Please visit Sena Type Operation Button Command Beep Bluetooth web site at www.sena.com to check the latest software Press the (+) Button and the Ascending downloads. - Page 53 SRL2 Type Operation Button Command Beep Press the Center Button for Play/Pause music 1 second Press the (+) Button for Music Track forward 1 second Press the (-) Button for Track backward 1 second Press the (-) Button for Mid-toned...
- Page 54 1.1.0 www.sena.com...
Need help?
Do you have a question about the SRL2 and is the answer not in the manual?
Questions and answers