Smappee EV One BUSINESS Installation Manual
Hide thumbs
Also See for EV One BUSINESS:
- Installation manual (37 pages) ,
- Quick starter manual (13 pages) ,
- Quick install manual (2 pages)
Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Smappee EV One BUSINESS
Summary of Contents for Smappee EV One BUSINESS
- Page 1 Smappee EV One BUSINESS Installation manual English – Version 1.0 – June 2023...
- Page 2 The specifications and other information in this document were verified to be accurate and complete at the time of its publication. Due to ongoing product improvement, this information is subject to change at any time without prior notice. For the latest information, see our online documentation: https://www.smappee.com/downloads...
-
Page 3: Table Of Contents
4. Components ....................8 5. Technical specifications................. 10 6. Preparing the installation ................13 7. Installation and activation ................16 8. Using the EV One Business ................25 Declaration of conformity ................... 29 Smappee EV One Business – Installation manual - English... -
Page 4: Introduction
This installation and user manual tells you how to install and use the Smappee EV One Business. We advise you to read the contents of this manual carefully, to ensure a safe and proper installation and enable you to use all the advanced features of this product to their full extent. -
Page 5: Safety Instructions
Safety warning Fully read and follow the safety instructions below before you install, service or use your Smappee EV One Business. The installer must ensure that the charging station is installed in accordance with the relevant national and local regulations. - Page 6 • Store the charging station in a dry environment within the temperature range specified in the technical specifications. Smappee EV One Business – Installation manual - English...
-
Page 7: Models
3. Models Article no. Description EVOB-332-B-E-B 5425036934061 EV One Business 3-Phase 22 kW Smappee EV One Business – Installation manual - English... -
Page 8: Components
4. Components Components included Smappee EV One Business – Installation manual - English... - Page 9 1. Manufacturer 2. Article number 3. Rating 4. Manufacturing date 5. QR code containing article number and serial number 6. Serial number 7. Degree of protection Smappee EV One Business – Installation manual - English...
-
Page 10: Technical Specifications
Communication protocol OCPP 1.6 JSON, ready for update to OCPP 2.0 Caution: not all vehicles support the IT system. In that case, or with 3-phase charging a voltage transformer may be required. Smappee EV One Business – Installation manual - English... - Page 11 Supply line connection Terminal block, flexible conductors up to 6 mm² or solid conductors up to 10 mm² Stationary / moveable Fixed installation External design Enclosed assembly Mounting method Floor / Ground-mounted Smappee EV One Business – Installation manual - English...
- Page 12 Where products are exposed to the elements of nature, the enclosure can be subject to gradual aging of the material, which can result in product discolouration over time. Therefore, wherever possible, place the product in a sheltered place to optimise the life of the materials. Smappee EV One Business – Installation manual - English...
-
Page 13: Preparing The Installation
Ethernet cable for the internet connection (if applicable). • Make sure that there is at least 100 cm cable available at the location of the EV One Business to be able to connect it easily internally. •... - Page 14 Route Ethernet cable The EV One Business requires a stable internet connection via Ethernet. An RJ-45 connector (not supplied) should be attached to the end of the cable. Smappee EV One Business – Installation manual - English...
- Page 15 RJ45 crimping tool Supplies (not included) CAT 5/6 Ethernet cable and RJ45 connector for internet access. Power supply cable Ferrules (6 mm²), for stranded power supply cables 32 A circuit breaker Smappee EV One Business – Installation manual - English...
-
Page 16: Installation And Activation
7. Installation and activation This procedure describes the required steps for the physical installation of the EV One Business. CAUTION: The installation must be carried out by a qualified professional who has read this manual and works in compliance with IEC 60364 standards. Neglecting this may lead to severe injuries or hazardous situations while working with electricity. - Page 17 First, mount the anchor component with the lip. This one needs to be mounted on the open side of the inner structure. • The two other components are mounted on the left and right sides of the inner structure. Smappee EV One Business – Installation manual - English...
- Page 18 Verify that the bottom of the EV One is flush with the ground level. The lip on the anchor can be used as a reference. The top of the lip should be level or slightly below ground level. e. Fill the hole with concrete and let it cure. Smappee EV One Business – Installation manual - English...
- Page 19 If you have a single-phase power supply, only the L1, N and PE need to be connected. Single-phase installation In case only one phase is available from the power supply, it is possible to install an EV One Business as a single-phase charging station. In this case, the one available phase should be connected to L1.
- Page 20 Belgium, Norway and France. If this is not applicable, you can skip this section. When an EV One Business is installed in a residential installation with a 3P (3 x 230 V) Delta grid connection, some additional requirements need to be taken into account. You can verify whether you have this topology by checking the grid connection to see if the following are true: •...
- Page 21 We highly recommend that you test compatibility with the customer’s EV during installation. If you have connected the EV One Business as shown above but the EV will not charge, you can try to disconnect the L2 cable going to the socket.
- Page 22 If you won’t use this method, please continue to the next section. The supplied QR code need to be put on right side of the Smappee EV One Business. Fix the QR code in the middle of this side and leave some space from the top. This space should be equivalent as the height of the QR code.
- Page 23 Activation This procedure is done with the Smappee mobile app. You can download this from the Apple App Store for iOS or the Google Play store for Android phones. The Smappee App will guide you through the various steps to fill in all the required information.
- Page 24 Attach the door to protect the socket using the provided screws. Place door in a horizontal position for easiest access to mount the screws. Verify the door can open without friction. Smappee EV One Business – Installation manual - English...
-
Page 25: Using The Ev One Business
1. Plug and charge: Simply connect your cable and start charging. 2. Swipe and charge: Connect the cable, swipe your card and start charging. 3. Scan and charge: Connect the cable, scan the QR code in the Smappee app and start charging. - Page 26 Charging sessions can be started using an RFID card. You can either use a Smappee Smart Charge Card for free charging or (if activated) a third party eMSP card to pay for charging sessions. The RFID reader is found on top of the EV One Business, together with the ambient light. •...
- Page 27 Scan and charge The user pays by credit card (Visa or Mastercard) using the Smappee app. They scan the QR code shown on the charging station and the app will guide them through the process of starting the charging session. It is also possible to set discount rates for specific users. Scan and charge is activated using the Smappee dashboard.
- Page 28 The Smappee EV One Check the manual or contact Business is unavailable. your supplier for more info and further steps. Red flashing Your charge card is not Contact your charge card authorised. supplier. Smappee EV One Business – Installation manual - English...
-
Page 29: Declaration Of Conformity
Metering Function : IEC 61010-1 Ed 3.0 (2010-06) + A1:2016 AC Charging equipment : IEC 61851-1 (2017) / EN61558-1 Other applicable standards and certifications: IEC 60364, IEC 62192-1, IEC 62192-2 Harelbeke, Belgium, April 13, 2023 Authorized signatory Stefan Grosjean Smappee EV One Business – Installation manual - English...
Need help?
Do you have a question about the EV One BUSINESS and is the answer not in the manual?
Questions and answers