Table of Contents
Advertisement
BUCKET TYPES AND APPLICATIONS
ZX160LC-3
Bucket
Hoe Bucket
Bucket reinforcement can
be welded in four places
upon customer's request
One Point Ripper
Clamshell Bucket
Slope-Finishing Blade
NOTE: • Symbols in the above table have the following meanings.
: General excavating
: Light duty excavating
: Rock digging
: Loading work
: Slope-finishing work
−: Not applicable (not warrantable)
• Hoe bucket is applicable to the following types of work.
General excavating:
For digging and loading operation of sand, gravel, clay, ordinary earth and so on.
Light duty excavating:
For digging and loading operation of dry, loosened earth, sand, mud and so on.
Their bulk density shall be less than 1.60 t/m
Loading:
For loading operation of dry, loosened earth and sand.
Their bulk density shall be less than 1.10 t/m
Rock digging:
For digging/loading operation of mountain gravels, blasted rock, hard clay, soft rock and so on.
IMPORTANT: Using inapplicable buckets may cause serious damage to the front structure such as boom, arm and
hydraulic cylinders.
SPECIFICATIONS
Bucket Capacity
3
3
m
(yd
)
PCSA
CECE
(Heaped)
(Heaped)
0.52 (0.68)
0.45
0.60 (0.79)
0.55
0.70 (0.92)
0.60
0.82 (1.07)
0.7
0.60 (0.79)
0.55
0.70 (0.92)
0.6
−
0.40
(0.52)
−
3
3
Bucket Width (in)
Application
(With side cutter)
910 (36")
1045 (41")
1125 (44")
1260 (50")
1045 (41")
1120 (44")
−
Bucket width
Side ditching
590 (23")
1700
Bank cutting
(67")
3
(2700 lb/yd
) as a standard.
3
(1850 lb/yd
) as a standard.
12-15
Front-End Attachment
ZX160LC-3
2.22 m (7'3")
Arm
finish
2.58 m (8'6")
Arm
−
Advertisement
Table of Contents
