Progress Of Programme; Changing The Programme After It Has Started - Smeg DHT82LSIT User Manual

Operating the product
5.14 Starting the programme
Press the Start/Pause button to start the program.
Start symbol will light up to indicate that the
programme has started and ":" symbol in the middle
of the remaining time will keep flashing. Drying and
programme progress bar will be displayed alternately.

5.15.Progress of programme

5.16 Child Lock
Machine is equipped with a Child Lock which prevents
interfering with the current programme flow by pressing
any button.
To activate the Child Lock:
• Press and hold Childproof Lock button for 3
seconds.
• Child Lock symbol will appear on the display when
the Child Lock is activated.
Programm Vapore
Bus ness Cotone Pronto St ro
Quot d ano Cotone Asc utto Armad o
S ntet c Pronto St ro Cotone Extra Asc utto
Cotone Pronto St ro
S ntet c Pronto St ro
Del cat S ntet c Asc utto Armad o
Sport Baby
Jeans P umone
Cam c e Lana / Asc ugatura con Cestello
26 / 68 EN
F ne /
Allarme On / O
Armad o
St ro
Asc ugatura
Asc ugatura
Intens tà / F ne
Ant p ega Prefer t
Avv o / Pausa
Durata Programmata
• All buttons except the On/Off/Cancel and Child
Lock button on the control panel are deactivated
when the Child Lock is active.
• Display symbols will not change even if the position
of Programme Selection knob is changed while the
child lock button is active.
• When the programme selection knob is turned and
function buttons are pressed Child Lock warning
will be displayed.
• To start a new programme after the current
programme is over or to interrupt the current
programme, the Child Lock should be deactivated.
To deactivate the childproof lock:
• Press and hold Child Lock button for 3 seconds.
• Child Lock is deactivated when the dryer is
switched off and on with On/Off/Cancel button.
5.17 Changing the programme after it
has started
• After the dryer starts operation, you can change
the selected programme and dry your laundry in a
different programme.
• Press and hold Start / Pause button for 1 seconds
to pause the programme.
• Select desired programme by turning the
Programme Selection knob.
• Press the Start/Pause button to start the program.
Adding / removing laundry while the dryer is
in operation
• In order to add or take out laundry after the drying
programme has started:
• Press the Start/Pause button to switch the dryer to
Pause mode. Drying process will pause.
• While in Pause mode, open the loading door, add
or take out laundry and close the loading door.
• Press the Start/Pause button to resume the
program.
Dryer / User Manual