Out-Of-Material Alarm Function - VEVOR XRJF-21 Instruction Manual

System 1 (left cylinder) parameter setting interface
Slush gear: 1-8 gears are adjustable, press "plus" or "minus" to adjust the gear,
The default is gear 3. The higher the gear, the harder the smoothie; and the lower the gear, the
smoother you make is softer.
Slush cycle time: This time adjusts the cooling system after the slush is 100% formed
Stop time, adjustable from 5-20 minutes, press "plus" or "minus" to adjust the gear
The default is 10 minutes.
Preservation temperature: Set the preservation temperature of the tray, adjustable from 5° C to 15° C,
and the default is 10°C.
Cold drink temperature: Set the cold drink refrigeration shutdown temperature, adjustable from 2 ° C
to 10°C, and the default is 7°C.
Number of cups delivered: Record the number of cups delivered by the machine for slush and cold
drinks, and press "Clear" to subtract to clear the data.
Restore factory settings: All data set by the user is cleared, and the parameters are restored to the
factory settings.
Next page: Enter system 2 (right cylinder system) user settings.
Note: All user-set parameters have a power-off save function, which will be automatically saved after
the setting is completed and returned.
System 2 (right cylinder) parameter setting interface
The parameter setting method of system 2 (right cylinder) is the same as that of the left cylinder.
Level float

Out-of-Material Alarm Function

The bottom of the tank is equipped with a level
float, any one of the tank level floats at a low level,
report a lack of materials, add raw materials to the
tank level float to float, and the lack of material
alarm is closed.
11