FULL CHEEKS 5318500 Quick Start Manual

Item # 5318500
WARNING: Use care to avoid pinching of fingers during assembly. Adult assembly required.
Plastic Base (X1) Drawer (X1)
Water Hay Feeder
Bottle (X1) (X1)
Assemble the steel tube supports onto the plastic base posts
and secure with the screw and barrels with hex wrenches.
Unfold the front and back panels of the wire habitat, followed
by the side panels and secure with bottom and center clips
as shown.
GUINEA PIG HABITAT ASSEMBLY INSTRUCTIONS
Fleece (X1)
Food Bowl Screws Steel Tube
(X1) (X5) Supports (X3)
(spare included)
Fix with
screw and barrels
EASY-CLEAN COTTAGE
Wire Habitat (X1)
Screws and Bottom Corner
Barrels (X6)
(spare included)
Remove the adhesive backing from the hook and loop
fastener tabs on the fleece and evenly apply it to the bottom
of the drawer. Insert the drawer into the base.
Assemble the door by snapping the hinges in place as shown.
Ensure the latch secures the door from opening.
Door (X1) Shelf (X1)
Habitat
Clips (X5) Clips (X5)
(spare included)
Ramp (X1)
Center Hex
Clips (X5) Wrenches
(spare included) (X2)