Table of Contents
Advertisement
4.1
Driver Download and Installation
Drivers for the NanoCOM-APL-B10 can be downloaded from the product page on the
AAEON website by following this link:
https://www.aaeon.com/en/p/com-express-modules-nanocom-apl
Download the driver(s) you need and follow the steps below to install them.
Step 1 – Install Chipset Drivers
1.
Open the Step1 – Chipset followed by SetupChipset.exe
2.
Follow the instructions
3.
Drivers will be installed automatically
Step 2 – Install Graphics Driver
1.
Open the Step2 - VGA folder.
2.
Open the Setup.exe file in the folder
3.
Follow the instructions
4.
Drivers will be installed automatically
Step 3 – Install LAN Drivers
1.
Open the Step3 - LAN folder followed by PROWinx64_20_3.exe file
2.
Follow the instructions
3.
Drivers will be installed automatically
Step 4 – Install Audio Drivers
1.
Open the Step4 - Audio folder followed by
0006-64bit_Win7_Win8_Win81_Win10_R279.exe file
2.
Follow the instructions
3.
Drivers will be installed automatically
Chapter 4 – Driver Installation
46
Advertisement
Table of Contents
