Table of Contents
Advertisement
To connect the mower:
r
t
w
e
To start the mower:
z
To adjust the cutting height:
i
WARNING! Risk of electric shock!
To avoid damage to the plug
must be inserted into the cable lock
v Before you operate insert the extension cable
cable lock
1. Connect the socket
2. Loop the extension cable
and pull tight.
3. Connect the extension cable
WARNING! Risk of physical injury!
Risk of injury if the product does not stop when you
release the start lever.
v Do not bypass the safety devices or switches.
For example do not attach the start lever
To start:
The product is fitted with a two-handed safety device
(start lever
u
from being turned on by accident. Contact the GARDENA
service
if this is not garanteed.
1. Push the safety interlock
start lever
2. Release the safety interlock
The product will start.
To stop:
1. Release the start lever
WARNING! Risk of physical injury!
Cut injury when the front and rear axles are adjusted
in different height positions.
v Adjust the front and rear axles in the same height position.
v Adjust the front axle in the same height positon on both
sides.
The cutting height can be adjusted in 3 height positions
o
(2 cm, 4 cm and 6 cm).
1. Lay the product on its side carefully.
2. Pull the front wheel axle
openings
3. Release the front wheel axle
openings
Make sure that the front axle is fully released on both sides
in the same height position.
(15)
.
(12)
of the extension cable
(13)
, insert the loop into the cable lock
(13)
into a 230 V mains socket.
(17)
with safety interlock
(16)
with one hand and pull the
(17)
with the other hand.
(16)
.
(17)
.
(18)
out of the current height adjust
(19)
.
(18)
in the new height adjust
(19)
.
(14)
the extension cable
(15)
.
(13)
into the
(13)
to the plug
(17)
to the handle.
(16)
) to prevent the product
(13)
(14)
.
(15)
17
Advertisement
Table of Contents
