Advertisement
Quick Links
Advertisement
Related Manuals for Haier HDHP80AW1
Summary of Contents for Haier HDHP80AW1
- Page 1 HDHP80AW1 HDHP80AWB1...
- Page 3 Technical data...
- Page 4 Do not touch the rear wall and the drum during operation; they are hot. If the lint filter is damaged, contact your Haier service technician toarrange getting a new filter. Do not operate your appliance with a damaged lint filter or without the filter in place, as this will cause damage to your appliance.
- Page 5 Do not dry following items in the appliance: Items that have been soiled with substances such as cooking oil, acetone, alcohol, petrol, kerosene, spot removers, turpentine, waxes and wax removers should be washed in hot water with ab extra amount of detergent before being dried in the appliance.
-
Page 6: Care And Cleaning
Install the appliance on a solid and level surface ensuring it has 20mm clearance on each side. The appliance must not be installed on any textured floor coverings (eg carpet, rugs). Servicing & Disposal A damaged electrical cable must be replaced by a Haier service technician or... - Page 7 No other parts are designed to be removed by the user. When disposing of the dryer, it is recommended that the door is removed to avoid children getting trapped inside, and that the electrical cable is cut off close to the dryer. HDHP80AW1 HDHP80AWB1...
-
Page 9: Clean Filter Indicator
Cotton Mixed Synthetics Bedding Express 60’ Delicate Shirts Durable Wool Baby Care Towels Bulky Anti-crease Time Delay Favorite Dry level Time Dry Allergy Air Dry Empty tank indicator Favorite indicator Delay Clean filter indicator Favorite Delay indicator Empty tank indicator Water tank must be emptied (Fig. - Page 10 4.6 Delay indicator When choose the delay program(Fig.4-6), It will light up 4.6 Favorite mode Press Favorite for three seconds, It will light up(Fig.4 -7). The current program and setting function will be set to favorite mode, and the next time the program is selected, the favorite setting will be automatically called.Press and hold the Delay and Favorite keys for 3 seconds,clear all Favorite program settings,restore the...
- Page 11 4.13 Delay Delay function allows users to delay the start time of the cycle. Press the button(Fig.4-13) to set the desired starting time (From 0 up to 12 hours). When activating, the indicator icon (Fig.4-6) will light up. 4.14 Favorite Before startup, it can be set.
- Page 13 Suitable for conventional drying of cotton linen and polyester cotton Shirts blended shirts Wool For wool clothes A cycle for mixed loads including Mixed cottons, synthetics and mixed fibres A fixed 60 minutes dry Express 60’ For baby clothes and underwear Baby Care that needs high temperature to reduce allergens and bacteria...
- Page 14 Sort items into loads of similar items,and loads that will likely take similar times to dry. T his prevents the possibility of some items becoming over-dried whilst others are still damp. Separate coloured items from white/light items where possible, especially when new. Colour run may be an issue, especially if you intend to delay the start of the drying cycle.
- Page 15 Garments need to be loaded correctly to minimise creasing and wrinkling, and to ensure the load is dried evenly. Allow enough room in the dryer for clothes to tumble freely. Load the dryer in terms of the space the garments take up when dry, rather than when they are wet. Shake clothes out and load individually to help items dry evenly and reduce tangling.
- Page 16 Turn the knob to any position (except OFF) to start the machine. Delay （ ）...
- Page 17 Press to restart the dryer with the new cycle. When the cycle finishes, your dryer will beep and then turn off automatically.If the Anti-crease option has been selected, the dryer will rotate the drum periodically to help minimise wrinkling and creasing of your load.
- Page 19 There are sensors in your dryer that detect whether the laundry is dry or not. These sensors need to be cleaned periodically (we recommend approximately four times a year). 1.Open the door of your dryer. Allow the dryer to cool if dry -ing has been carried out.
- Page 21 Your dryer is capable of diagnosing a number of its own problems. It will sound a continuous series of bee -ps and display a user prompt when it has a problem that you can correct yourself. To stop the beeps sou -nding,touch any button on the control panel.
- Page 22 When a continuous series of beeps sound, all the lights turn off on the control panel and a string of codes appears on the display. a fault has occurred.Please refer to the following instructions. / Water level switch failure Communication failure of the display board itself Open the door and clean the lint Filter clogging alarm filters .
- Page 23 Refer to 'Emptying the water tank'. Water tank needs to be Small amount of emptied. water in the drum at end of cycle If conditions are particularly hot, Environmental conditions humid or cold, it is possible vaporised may be affecting dryer water may re-condense in the drum operation.
- Page 24 Ensure the lint filter is cleaned after Lint filter not cleaned every cycle and replaced correctly. or replaced. Refer to 'Cleaning the filters'. Dry lint-giving items separately from Loads not sorted correctly. lint receivers.Also,dry similar colours together,eg light coloured items with light coloured items,dark items with dark items.
- Page 25 Try separating out larger itemns Loads not separated from smaller items. during loading. Load items individually into the Items loaded into the dryer.Do not place folded items dryer incorrectly. in the dryer. Try dIrying smaller load sizes. Load size too large. Some cycles have a lower maximum load size.Refer to'Drying rack'.
- Page 29 Normal recommended maintenance as set out in the product's User guide. Repairs when the appliance has been dismantled,repaired or serviced by other than a Haier trained and supported service technician or the selling dealer.
-
Page 30: Technical Data
Technical data replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. 14 Additional technical data Product dimensions FRONT VIEW... - Page 32 0180501350A...
Need help?
Do you have a question about the HDHP80AW1 and is the answer not in the manual?
Questions and answers
Not hot enough take's long time to dry