Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Embest SBC8140
Summary of Contents for Embest SBC8140
- Page 1 SBC8140 Single Board Computer Quick Guide Version 1.0 – Mar. 20 , 2013...
- Page 2 Copyright Statement: SBC8140 and its related intellectual property are owned by Shenzhen Embest Technology Co., Ltd. Shenzhen Embest Technology has the copyright of this document and reserves all rights. Any part of the document should not be modified, distributed or duplicated in any approach and form with the written permission issued by Embest Technology Co., Ltd.
-
Page 3: Table Of Contents
Chapter 4 WinCE Operating System ................10 4.1 Updating SD Card and Booting from It..............10 4.2 Updating NAND Flash and Booting from It ............12 Technical Support and Warranty ..................13 Copyright © 2013 Embest Technology SBC8140 Quick Guide... -
Page 4: Chapter 1 Product Overview
SBC8140 has a Linux2.6.32 system in NAND Flash by default SBC8140 boots from NAND Flash by default; pressing and holding BOOT button (button CN11) before connecting power can make it boot from SD card; Copyright © 2013 Embest Technology... -
Page 5: Chapter 2 Preparations
Please connect hardware components and find locations of button according to the figure shown below; Figure 2-1 Hardware connections Table 2-1 Hardware Connections Descriptions Descriptions Insert a SD card BOOT button Connect serial cable Connect power adapter Copyright © 2013 Embest Technology SBC8140 Quick Guide... -
Page 6: Setting Up Hyperterminal
HyperTerminal on your PC’s desktop; Figure 2-2 Start HyperTerminal 2） Enter a name in the Name field and select an icon below, and then click OK; Figure 2-3 Create a new HyperTerminal Copyright © 2013 Embest Technology SBC8140 Quick Guide... - Page 7 Embest Technology 3） Select the port to be used and click OK; Figure 2-4 Select port Copyright © 2013 Embest Technology SBC8140 Quick Guide...
- Page 8 Embest Technology 4） Please configure the port you selected as shown in the following window, and then click OK; Figure 2-5 Configure port Copyright © 2013 Embest Technology SBC8140 Quick Guide...
- Page 9 Embest Technology 5） HyperTerminal has been set up successfully. Figure 2-6 HyperTerminal window Copyright © 2013 Embest Technology SBC8140 Quick Guide...
-
Page 10: Chapter 3 Linux Operating System
You can download HP USB Disk Storage Format Tool 2.0.6 from http://www.embedinfo.com/english/download/SP27213.exe, and use it to format SD card; the figure shown below is the tool’s interface; Figure 3-1 Format SD card Copyright © 2013 Embest Technology SBC8140 Quick Guide... -
Page 11: Updating Nand Flash And Booting From It
SBC8100_PLUS login: (enter“root”) Note: By default SBC8140 boots from NAND Flash; pressing and holding BOOT button before connecting power can make it boot from SD card. By default, the system support 4.3-inch screen. If you need to select another display mode, please refer to SBC8140 User Manual section 3.7 Display Mode Configurations... - Page 12 Type run updatesys and press Enter key to start system update; 5） When the LEDs on the kit start to blink, the update is completed; please remove SD card and reboot the system; Copyright © 2013 Embest Technology SBC8140 Quick Guide...
-
Page 13: Chapter 4 Wince Operating System
X:\WINCE600\image\ (X is label of your DVD drive) to SD card; 2） Insert the SD card on SBC8140 and power it on while pressing and holding BOOT button (refer to 2.1 Hardware Connections and Buttons to find the button); When you information counting down in seconds, please press Space key on your PC’s keyboard to enter eboot menu. - Page 14 [3] Select KITL (Debug) Device [4] Network Settings [5] SDCard Settings [6] Set Device ID [7] Save Settings [8] Flash Management [9] Enable/Disable OAL Retail Messages [a] Select Display Resolution [0] Exit and Continue Copyright © 2013 Embest Technology SBC8140 Quick Guide...
-
Page 15: Updating Nand Flash And Booting From It
The WinCE system is updated and booted up successfully after booting process is completed. Note: By default SBC8140 boots from NAND Flash; pressing and holding BOOT button before connecting power can make it boot from SD card. 4.2 Updating NAND Flash and Booting from It 1）... -
Page 16: Technical Support And Warranty
Embest Technology Technical Support and Warranty Technical Support Embest Technology provides its product with one-year free technical support including: Providing software and hardware resources related to the embedded products of Embest Technology; Helping customers properly compile and run the source code provided by Embest Technology;... - Page 17 4） Please contact technical support if there is any repair request. Note: Embest Technology will not take any responsibility on the products sent back without the permission of the company. Copyright © 2013 Embest Technology SBC8140 Quick Guide...
- Page 18 Contact Information Hotline: +86-755-25635626-872/875/897 Fax: +86-755-25635626-666 Pre-sales: sales@timll.com After-sales: support@timll.com Website: http://www.timll.com Address: Tower B 4/F, Shanshui Building, Nanshan Yungu Innovation Industry Park, Liuxian Ave. No. 1183, Nanshan District, Shenzhen, Guangdong, China (518055) Copyright © 2013 Embest Technology SBC8140 Quick Guide...
Need help?
Do you have a question about the SBC8140 and is the answer not in the manual?
Questions and answers