Toshiba RZE-BT160H - Wireless Headphones Manual

About Using Bluetooth®

This product is designed for use with Bluetooth® wireless devices compatible with the HFP, HSP, A2DP and AVRCP streaming audio profiles. Refer to your Bluetooth® device's user manual or technical support to determine if your Bluetooth® device supports these profiles.

• Frequency band used
  This product uses the 2.4 GHz frequency band. However other wireless devices may use 2.4 GHz frequency band as well and may cause interference with each other. To avoid interference, please refrain from the use of the unit at the same time with other wireless devices.
• Certification of this device
  This product conforms to frequency restrictions and has received certification based on frequency laws, so a wireless permit is not necessary.
  However, the following action is punishable by law in some countries:
  • Taking apart/modifying the product.
• Usage restrictions
  • Wireless transmission and/or use with all Bluetooth® equipped devices is not guaranteed.
  • A device featuring the Bluetooth® function is required to conform to the Bluetooth® standard specified by Bluetooth SIG, and be authenticated. Even if the connected device conforms to the above mentioned Bluetooth® standard, some devices may not be connected or work correctly, depending on the features or specifications of the device.
• Range of use
  Use this product with a device within an unobstructed 10 m range. The range of use or perimeter may be shortened depending on any obstructions, devices causing interference, other people in the room, or the construction of the building. Please note that the range mentioned above is not guaranteed.
  The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and are used under license.
  Note
  This product may receive radio interference caused by mobile telephones during use. If such interference occurs, please increase separation between this product and the mobile telephone.

Getting Started

This product has a built-in lithium polymer ion rechargeable battery. Before use, fully charge the battery by connecting the product to a computer or a universal USB mobile charger through the provided USB cable.
The red indicator turns on while the battery is charging. The red indicator will turn off when the battery is fully charged (around 3 hours).

Wearing this Headphone

Check the left and right and attach them firmly to fit your ears.

• The one marked with "R" is for the right ear, and the one marked with "L" is for the left ear.
  
• Pull the head band to adjust the length.
• It can be connected to devices compatible with stereo mini plug.

Using this Headphone

Listening to Bluetooth® Music

In order to use the product for music playback or speakerphone functions through Bluetooth®, the headphone must first be paired with the Bluetooth® device.

Pairing:

1. Press and hold the Play/Pause button to turn the power on.
   A power-on message is heard.
   The headphone will go into pairing mode, the blue indicator lights up and the red indicator flashes, and a pairing message is heard.
2. Following the instructions in your device's user manual, activate Bluetooth® on your device and search for devices.
   Once you have found "RZE-BT160H", pair with the headphone.

• Input the pass code "0000" if required.
  Once connected, a connected message is heard.
• The red indicator will go off and the blue indicator remains lit.

• When using a device paired with this headphone once, this headphone will pair/connect automatically.
• This headphone will pair with the last connected device when that device is in range.
• The headphone will power off if no device has been paired for more than 5 minutes.
• The headphone will cancel the pairing with the currently connected device if you press and hold the + and - buttons simultaneously. The disconnected message is heard and the headphone turns into the pairing mode.
• This headphone can be paired/connected with two devices at the same time. To pair with the second device, disconnect the first device after it is paired and turn the power off. Turn the power on and pair/connect the second device. After that, connect the first device again, and then two devices become connected. Press the play button on either of the device to play its music.

Playing Bluetooth® Music

Once your device and the headphone are connected, you can listen to music through Bluetooth®.

1. Press the Play/Pause button either on your device or this headphone to play or pause music.
   During playback, the blue indicator flashes every 3 seconds.
2. Use the + / - buttons on this headphone to adjust the volume level.

Notes

• Press and hold the + button during playback or while paused to skip the track forward.
• Press and hold the - button during playback to play from the beginning of the track.
• Press and hold the - button at the beginning of the track to move to the previous track.

Turning off the power

1. Press and hold the Play/Pause button to turn the power off.
   A power-off message is heard.

Playing line-in Music

You can connect an MP3 player or other portable audio device through this headphone via the AUX IN socket.

1. Plug a 3.5 mm plug into the line-out jack on your device and plug the other end of the cable into the AUX IN socket of this headphone.
2. Turn on and play your device.
3. Adjust the volume level on your device.

Note
If you insert a line-in cable while Bluetooth® connection, the headphone will power off and the Bluetooth® function stops. To use the Bluetooth® function, disconnect the line-in cable and turn the power on.

Making calls with a Bluetooth® Mobile Phone

Before the speakerphone feature of this headphone can be used, you will need to pair and connect your Bluetooth®-enabled phone with this headphone. Please refer to "Pairing".

Answer a call:

1. To answer a call, press the Play/Pause button.
   You can then use this headphone as a speakerphone.
2. Use the + / - buttons on this headphone to adjust the call volume.
3. To end the call, press the Play/Pause button.

Dialing:

1. Once this headphone is paired with a Bluetooth® mobile phone, you can use the keypad on your phone to dial a phone number.
   Press the Play/Pause button to cancel the call.
2. Use the + / - buttons on this headphone to adjust the volume level.
   Note
   Changes to the volume settings for phone operation may affect the volume of other modes on your mobile phone.

3. To end a call, press the Play/Pause button.

Specifications

Bluetooth® section
Bluetooth® spec.	Version 4.2
Supported profile	A2DP, AVRCP, HFP, HSP
Service distance	Up to 10 m
General
Frequency Response	20 Hz - 20 KHz
Battery	Internal lithium polymer ion battery (300 mA)
Charging Voltage	DC 5V (Micro USB charging)
Operating time	Bluetooth® music play time: Approx. 6 hours at 50% volume level
Weight	Approx. 154 g
Speaker	32 ohm
Accessories	Micro USB cable x 1, Line in Cable (3.5 mm ) x 1set, Operation manual x 1

This user manual may be changed without prior notice to improve product performance.
The images included in this guide may differ from the actual image and may change without notice.

TOSHIBA LIFESTYLE ELECTRONICS TRADING CO., LTD.
1-1-8, Sotokanda, Chiyoda-ku Tokyo 101-0021, Japan

Documents / Resources

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Toshiba RZE-BT160H - Wireless Headphones Manual