Table of Contents
Advertisement
Operation
Program cancel-
lation with manual
disinfection
Manual program
cancellation
Program cancella-
tion due to fault
52
End of program
After the program has ended, the following is displayed:
- Cycle number
- time elapsed since the end of the program
- Result of the wash process
Program finished
-
message
The progress bar changes from white to green.
The wash cabinet lighting can be switched on automatically depend-
ing on the pre-setting.
Canceling a program
A reprocessing program can be canceled at any time. The wash water
is drained, then the door on the infeed side is released.
Press the button.
A confirmation prompt is displayed:
Cancel program?
.
Confirm the confirmation prompt with
Once the water has finished draining, the following message will ap-
pear on the display:
Program cancelled
.
The progress bar is red and the following fault message is displayed:
Program aborted by user
Once the fault message has been acknowledged, the program can be
restarted.
For programs with the
additional steps may be necessary for program cancellation. If there
has been no thermal disinfection, the wash water must be decon-
taminated manually.
During the first program phase:
Press the button and confirm the confirmation prompt
program?
Yes
with
The fault message
Program aborted by user
There is wash water in the wash cabinet; it is not drained.
If the program is canceled due to a fault during the initial program
phase, the wash water is not drained. The required steps are de-
scribed under "Manual disinfection".
.
Drainage after disinfection
.
Yes
.
parameter activated,
is displayed.
Cancel
Advertisement
Table of Contents
