Related Manuals for Makita 8406
Summary of Contents for Makita 8406
- Page 1 INSTRUCTION MANUAL Diamond Core Hammer Drill 8406 DOUBLE INSULATION Read before use.
-
Page 2: Specifications
SPECIFICATIONS Model 8406 Capacities Concrete Diamond core bit 152 mm Tungsten-carbide tipped bit 20 mm Steel 13 mm Wood 30 mm No load speed (min 0 - 1,500 Blows per minute 0 - 22,500 Overall length 400 mm Net weight 3.7 kg... -
Page 3: Ec Declaration Of Conformity
Do not touch the power plug with wet hands. EC Declaration of Conformity 10. If the cord is damaged, have it replaced by the manu- facturer or his agent in order to avoid a safety hazard. For European countries only Personal safety The EC declaration of conformity is included as Annex A Stay alert, watch what you are doing and use... -
Page 4: Hammer Drill Safety Warnings
Power tool use and care Hammer drill safety warnings Do not force the power tool. Use the correct power tool for your application. The correct Safety instructions for all operations power tool will do the job better and safer at the Wear ear protectors when impact drilling. -
Page 5: Functional Description
Torque limiter FUNCTIONAL DESCRIPTION CAUTION: • Do not continue to operate the tool for more than two seconds while the clutch is slipping. CAUTION: • Do not let the torque limiter actuate too • Always be sure that the tool is switched off and frequently. -
Page 6: Operation
To install the bit, place it in the chuck as far as it will go. Tighten the NOTE: chuck by hand. Place the chuck key in each of the three holes and • A pilot hole is not required for 22 mm and 28 mm tighten clockwise. -
Page 7: Maintenance
Discoloration, deformation or cracks may result. To maintain product SAFETY and RELIABILITY, repairs, carbon brush inspection and replacement, any other maintenance or adjustment should be performed by Makita Authorized Service Centers, always using Makita replacement parts. OPTIONAL ACCESSORIES CAUTION: •... - Page 8 Makita Europe N.V. Jan-Baptist Vinkstraat 2, 3070 Kortenberg, Belgium Makita Corporation 3-11-8, Sumiyoshi-cho, Anjo, Aichi 446-8502 Japan 883731H991 www.makita.com 20201218...
Need help?
Do you have a question about the 8406 and is the answer not in the manual?
Questions and answers