Firmware Update - D-Link DSL-124 User Manual
Wireless n300 adsl2+ modem router
Hide thumbs
Also See for DSL-124:
- Quick installation manual (8 pages) ,
- User manual (2 pages) ,
- Modem configuration manual (2 pages)
Table of Contents
Advertisement
Section 4 - Configuration
This page allows you to upgrade the firmware of your router. Make sure the firmware you
want to use is on the local hard drive of the computer and then click Browse to upload
the file.
Current Firmware
Displays your current firmware's version.
Version:
Current Firmware
Displays your current firmware's release date.
Date:
Firmware File
After you have downloaded a new firmware, click Browse... and
Name:
locate the firmware on your computer. To begin the firmware update
process, click Update Firmware. The update process takes about two
minutes to complete.
Warning: You must use a computer with a wired connection to the
device to upload the firmware file; do not use a wireless client. During
the upgrade process, do not power off your computer or router, and
do not refresh the browser window until the upgrade is complete.
D-Link DSL-124 Wireless N300 ADSL2+ Modem Router User Manual
Firmware Update
FIRMWARE UPDATE
113
- Quick Links:
- Wireless Setup
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the DSL-124 and is the answer not in the manual?
Questions and answers
how i can set a QoS option i do not understand any thing in it , i need to set an limit speed for each user
To set the QoS option on a D-Link DSL-124 to limit speed for each user:
1. Access the QoS configuration page.
2. Enable IP QoS by clicking the radio button.
3. Choose between WFQ (Weighted Fair Queuing) or strict priority.
4. Configure QoS rules to set bandwidth limits for specific users based on IP or MAC addresses.
5. Click "Apply Changes" to activate the settings.
This setup helps manage network traffic and limit speed for each user.
This answer is automatically generated