Table of Contents
Advertisement
Step 3.
Remove the hinges from the cabinet frame; then, rotate them 180 degree, and install them to the
opposite site of the frame.
Figure 24. Converting the cabinet frame hinges
Step 4.
If the cabinet comes with door position monitor devices, complete the following steps to remove
and reinstall the devices.
a.
Remove the two screws that secure the door position monitor device to the cabinet frame.
Figure 25. Removing the door position monitor device
b.
Install the device to the equivalent location on the opposite side on the cabinet frame.
26
ThinkSystem Micro DataCenter 12U Rack Cabinet User Guide
Advertisement
Table of Contents
