HETCH H2 HVC-1413-HC - Handheld Vacuum Cleaner & Mop Quick Guide

Parts Identifications

1. Handle
2. Power Cable Hook
3. Aluminum Tube
4. Tube Latch
5. ON/OFF Switch
6. Dust Tank Release Button
7. Floor Brush
8. Main Unit
9. HEPA Filter
10. Dust Tank
11. Water Tank
12. Mop

Assembly

Preparation

1. Assembling aluminum tube into the main unit.
2. Assembling floor brush into the dust tank.
3. Assembling water tank into the floor brush.

Specifications

Attention

1. Do not pull the wire or machine when unplug socket.
2. Do not collect burning cigarettes or hot item with this machine.
3. Do not collect objects carrying liquid with this machine.
4. Do not collect sharp objects with this machine.

Cleaning and Maintenance

Empty and clean the dust tank, filter & water tank

1. Turn OFF machine and unplug before empty dust.
2. When the dust tank is dirty or full, please empty it.
3. Dis-assemble the floor brush. (image 1)
   
4. Press dust tank release button then tilt dirt dust tank down and away from unit. (image 2)
   
5. Grasp filter from the center, pull filter out from dust tank than empty the tank into waste basket.
6. Wash or refill water tank. (image 3)
   

Cleaning HEPA filter

1. HEPA filter should be rinsed clean at least twice a month or when it becomes visibly solid.
2. Always operate the cleaner with filter installed.
3. Otherwise, this may reduce suction or damage the motor.
4. Disconnect from electrical outlet before cleaning HEPA filter.
5. Do not use the washing machine for rinsing filter, or use hair dryer for drying it.
6. Clean the HEPA filter in cool water.
7. Air dry it completely before re-assembling.

Troubleshooting

If the machine does not operate normally, please contact the authorized service center.

Marketed by:

IN & EX HOLDINGS SDN. BHD.
No. 48-3, Jalan PJU 5/10,
Dataran Sunway, Kota Damansara, 47810 Petaling Jaya, Selangor D. E. , Malaysia.
Tel: (603) 6141 6802
E-mail: hetch2u@gmail.com