Advertisement
For Husqvarna Parts Call 606-678-9623 or 606-561-4983
8
LOWER CHUTE
(See Figure 8)
1. Raise and hold deflector shield in upright posi-
tion.
2. With your left hand, hold lower chute as shown
and hook rear latch to mower deck, then care-
fully release deflector shield.
3. Raise deflector shield and align "B" on lower
chute extended edge with "B" on mower hous-
ing.
4. With your right hand, push firmly on the lower
chute until the extended edge slides under the
deflector shield and along side the hinge
bracket as shown.
5. With chute in proper position, hold the chute
securely, so it does not move, while hooking
the front latch to the mower deck.
NOTE: While hooking the latches, the deflector
shield may try to push the chute away from
the mower deck opening. It is important to hold
the chute in position while hooking the latches
to the mower deck.
CAUTION
Before raising deflector shield, turn mower
engine off. DO NOT remove deflector shield
from mower. Raise and hold shield when at-
taching lower chute and allow it to rest on
chute while in operation.
10
ASSEMBLY
FIGURE 8
www.mymowerparts.com
EXTENDED EDGE "B"
Must be under deflector
shield and along side the
hinge bracket
DEFLECTOR
SHIELD
REAR
LATCH
ALIGN CHUTE "B"
WITH MOWER "B"
PUSH IN
DEFLECTOR SHIELD
HINGE BRACKET
FRONT
LATCH
Advertisement
