Related Manuals for Aewin AW-BS 710
Summary of Contents for Aewin AW-BS 710
- Page 1 AEWIN Technology Inc. SOM-ETX Model Number AW-BS710 Intel® Pentium® M / ULV Celeron M Processor with CRT/LVDS, LAN & Audio User’s Manual Version 1.0 We embed your need! ©Copyright 2005...
- Page 2 While reasonable efforts have been made to ensure the accuracy of this manual, the manufacturer and distributor assume no liability resulting from errors or omissions in this manual, or from the use of the information contained herein. ©2005 AEWIN Technologies Co., Ltd. All rights reserved. Ver 1.0. Aug, 2005...
-
Page 3: Table Of Contents
4.1 Chipset Software Installation Utility..............28 4.2 CRT/LVDS Driver Installation ................29 4.3 Ethernet Driver Installation................. 30 4.4 AC97 Audio Driver Installation ................33 4.5 USB2.0 Driver Installation ................... 34 ©2005 AEWIN Technologies Co., Ltd. All rights reserved. Ver 1.0. Aug, 2005... -
Page 4: Chapter 1. General Information
Support ISA & PCI expansion interface interface Flat Panel/CRT Interface Built-in 852GM/855GME chipset Chipset Support CRT and LVDS panel interface Display type Display Memory Up to 32MB of dynamic video memory allocation ©2005 AEWIN Technologies Co., Ltd. All rights reserved. Ver 1.0. Aug, 2005... -
Page 5: Package
Electrostatic discharge can be easily damage the AW-BS710 board. Do not remove the anti-static packing until you are ready to install the AW-BS710 ©2005 AEWIN Technologies Co., Ltd. All rights reserved. Ver 1.0. Aug, 2005... - Page 6 To ground yourself, grasp the expansion slot covers or other unpainted parts of the computer chassis. Handle the AW-BS710 board by its edges and avoid touching the components on it. ©2005 AEWIN Technologies Co., Ltd. All rights reserved. Ver 1.0. Aug, 2005...
-
Page 7: Board Layout
User’s Manual 1.5 Board Layout (Front View) Intel 852GM/855GME Pentium M/Celeron M CPU socket Intel ICH4 SO-DIMM socket (Rear View) ©2005 AEWIN Technologies Co., Ltd. All rights reserved. Ver 1.0. Aug, 2005... -
Page 8: Board Dimension
User’s Manual 1.6 Board Dimension (Front View) (Rear View) ©2005 AEWIN Technologies Co., Ltd. All rights reserved. Ver 1.0. Aug, 2005... -
Page 9: Chapter 2. Memory Installation
There is only one direction for installing a module in the socket. Do not attempt to force the module into the socket incorrectly. ©2005 AEWIN Technologies Co., Ltd. All rights reserved. Ver 1.0. Aug, 2005... -
Page 10: Remove Memory
2.2 Remove Memory To Remove a DIMM Memory: To remove a DIMM, press down on the levers at both end of the module until the module pops out ©2005 AEWIN Technologies Co., Ltd. All rights reserved. Ver 1.0. Aug, 2005... -
Page 11: Chapter 3. Bios Setup
3. In the main menu, press F10 (“Save & Exit Setup”) to save your changes and reboot the system. ©2005 AEWIN Technologies Co., Ltd. All rights reserved. Ver 1.0. Aug, 2005... -
Page 12: Entering The Cmos Setup Program
1. Turn on or reboot the system. After the BIOS performs a series of diagnostic checks, the following message appears: “Press DEL to enter SETUP” 2. Press the <DEL> key to enter CMOS Setup program. The main menu appears: ©2005 AEWIN Technologies Co., Ltd. All rights reserved. Ver 1.0. Aug, 2005... -
Page 13: Menu Options
Configure the CPU speed and, if the optional Winbond W83627HF system monitor IC is installed, view system information LOAD FAIL-SAFE DEFAULT: Loads BIOS default values. Use this option as diagnostic aid if your system behaves erratically ©2005 AEWIN Technologies Co., Ltd. All rights reserved. Ver 1.0. Aug, 2005... -
Page 14: Standard Cmos Features Setup
1. Choose “Standard CMOS Features” from the main menu. The following screen appears: 2. Use the arrow keys to move between fields. Modify the selected field using the PgUP/PgDN/+/- keys. Some fields let you enter numeric values directly. ©2005 AEWIN Technologies Co., Ltd. All rights reserved. Ver 1.0. Aug, 2005... -
Page 15: Advanced Bios Features Setup
3.5 Advanced BIOS Features Setup Use the Advanced BIOS Features Setup option as follows: 1. Choose “Advanced BIOS Features Setup” from the main menu. The following screen appears: ©2005 AEWIN Technologies Co., Ltd. All rights reserved. Ver 1.0. Aug, 2005... - Page 16 Today, while keyboards still provide this support, it is more common, and much faster, for the system chipset to provide support for gate A20.Fast. The chipset controls Gate A20. ©2005 AEWIN Technologies Co., Ltd. All rights reserved. Ver 1.0. Aug, 2005...
-
Page 17: Advanced Chipset Features Setup
3.6 Advanced Chipset Features Setup Use the Advanced Chipset Features Setup option as follows: 1. Choose “Advanced Chipset Features Setup” from the main menu. The following screen appears; ©2005 AEWIN Technologies Co., Ltd. All rights reserved. Ver 1.0. Aug, 2005... - Page 18 AGP Aperture Size (MB) This field is relevant to the memory-mapped graphics data of the AGP card installed in your system. Leave this in its default setting. ©2005 AEWIN Technologies Co., Ltd. All rights reserved. Ver 1.0. Aug, 2005...
-
Page 19: Integrated Peripherals
‘USB Keyboard Support” fields. Disables the onboard USB. USB2.0 Controller If you are using USB2.0, this field must be set to Enabled. AC97 Audio Auto Select this option when using the ©2005 AEWIN Technologies Co., Ltd. All rights reserved. Ver 1.0. Aug, 2005... - Page 20 Half Data is completely transmitted before receiving data. Full Transmits and receives data simultaneously. Onboard Parallel Port 378/IRQ7, 3BC/IRQ7, 278/IRQ5 Selects the I/O address and IRQ for the onboard ©2005 AEWIN Technologies Co., Ltd. All rights reserved. Ver 1.0. Aug, 2005...
-
Page 21: Power Management Setup
The Power Management Setup controls the board’s “green” features. To save energy these features shut down the video display and hard disk drive. Use the Power Management Setup option as follows: ©2005 AEWIN Technologies Co., Ltd. All rights reserved. Ver 1.0. Aug, 2005... - Page 22 The “Run VGABIOS if S3 When this field is set to Auto, the system will initialize Resume” and “USB KB the VGA BIOS when it wakes up from the S3 state. This ©2005 AEWIN Technologies Co., Ltd. All rights reserved. Ver 1.0. Aug, 2005...
- Page 23 The purpose of this function is to prevent the system from powering off in case you accidentally “ hit” or pushed the power ©2005 AEWIN Technologies Co., Ltd. All rights reserved. Ver 1.0. Aug, 2005...
-
Page 24: Pnp/Pci Configuration
3.9 PNP/PCI Configuration This option is used to configure Plug and Play assignments and route PCI interrupts to designated ISA interrupts. Use the PNP/PCI Configuration Setup option as follows: ©2005 AEWIN Technologies Co., Ltd. All rights reserved. Ver 1.0. Aug, 2005... - Page 25 Auto (ESCD) The system will automatically detect the settings for you. Manual choose the specific IRQ in the “ IRQ Resources” field. PCI/VGA Palette Snoop This field determines whether the MPEG ISA/VESA VGA ©2005 AEWIN Technologies Co., Ltd. All rights reserved. Ver 1.0. Aug, 2005...
-
Page 26: Pc Health Status Configuration Setup
The loaded default settings do not affect the Standard CMOS Setup screen. To use this feature, highlight it on the main screen and press <Enter>. A line will ©2005 AEWIN Technologies Co., Ltd. All rights reserved. Ver 1.0. Aug, 2005... -
Page 27: Load Optimized Defaults
3.14 Save and Exit Setup This function automatically saves all CMOS values before exiting Setup. 3.15 Exit Without Saving Use this function to exit Setup without saving the CMOS value. ©2005 AEWIN Technologies Co., Ltd. All rights reserved. Ver 1.0. Aug, 2005... -
Page 28: Chapter 4. Driver & Utility
The system driver installation procedure must be performed first. 4.1 Chipset Software Installation Utility It enables plug & play INF support for Intel® chipset components. Insert the setup CD then install the driver following the instruction. ©2005 AEWIN Technologies Co., Ltd. All rights reserved. Ver 1.0. Aug, 2005... -
Page 29: Crt/Lvds Driver Installation
User’s Manual 4.2 CRT/LVDS Driver Installation It support CRT or LVDS display function. Double click the utility in the setup CD to finish the installation. ©2005 AEWIN Technologies Co., Ltd. All rights reserved. Ver 1.0. Aug, 2005... -
Page 30: Ethernet Driver Installation
It supports the 10/100 Ethernet function by using Intel® 82551ER. Go to the “Device Manager”, choose the “Ethernet Controller” to update the driver. Choose the “Search for a suitable driver for my device”, click “Next” button. ©2005 AEWIN Technologies Co., Ltd. All rights reserved. Ver 1.0. Aug, 2005... - Page 31 User’s Manual Choose “Specify a location”, then click “Next” button. Find the driver file in the setup CD directory, choose the file then click “Open” button. ©2005 AEWIN Technologies Co., Ltd. All rights reserved. Ver 1.0. Aug, 2005...
- Page 32 User’s Manual Find the correct driver file, then press the “Next” button. Press “Finish” button to complete the installation. ©2005 AEWIN Technologies Co., Ltd. All rights reserved. Ver 1.0. Aug, 2005...
-
Page 33: Ac97 Audio Driver Installation
It supports AC97 audio function by using Realtek CODEC. Double click the file in the setup CD, follow the instruction to finish the installation. Choose “Yes, I want to restart my computer now”, then press “Finish” button to complete the installation. ©2005 AEWIN Technologies Co., Ltd. All rights reserved. Ver 1.0. Aug, 2005... -
Page 34: Usb2.0 Driver Installation
4.5 USB2.0 Driver Installation Go to the “Device Manager”, choose “Universal serial bus” to update the driver. Choose “Search a suitable driver for my device”, then press “Next” button. ©2005 AEWIN Technologies Co., Ltd. All rights reserved. Ver 1.0. Aug, 2005... - Page 35 User’s Manual Choose “Specify a location”, then press “Next” button. Choose the drive and file the setup CD is located, then press “Next” button. ©2005 AEWIN Technologies Co., Ltd. All rights reserved. Ver 1.0. Aug, 2005...
- Page 36 User’s Manual Find the correct driver, then press “Next” button. Press “Finish” button to complete the installation. ©2005 AEWIN Technologies Co., Ltd. All rights reserved. Ver 1.0. Aug, 2005...
Need help?
Do you have a question about the AW-BS 710 and is the answer not in the manual?
Questions and answers