Installing Or Removing Battery Cartridge; Description Of Operation - Makita AC001G Instruction Manual

OPERATION
Installing or removing battery
cartridge
CAUTION:
installing or removing of the battery cartridge.
CAUTION:
Hold the tool and the battery car-
cartridge. Failure to hold the tool and the battery
and result in damage to the tool and battery cartridge
Fig.2: 1. Red indicator 2. Button 3. Battery cartridge
To install the battery cartridge, align the tongue on the
CAUTION:
Always install the battery cartridge
fully until the red indicator cannot be seen.
you or someone around you.
CAUTION:
Do not install the battery cartridge
forcibly.
not being inserted correctly.
Indicating the remaining battery
capacity
Press the check button on the battery cartridge to indi-
Fig.3: 1.
Indicator lamps
Lighted
2. Check button
Remaining
capacity
Blinking
Charge the
battery.
The battery
may have
10 ENGLISH
NOTE:
NOTE:

Description of operation

WARNING:
Risk of Noise
Wear hearing protection to protect your
ears against exhaust noise and noise during
operation.
Drain valve:
use.
2. Remove the battery cartridge.
10 min.)
4. Install the battery cartridge.
ON/AUTO - OFF switch:
WARNING:
CAUTION:
element.
Air compressor pump:
cylinder. On the down stroke, air is drawn in through the
air intake valve. The exhaust valve remains closed.
through the exhaust valve, through the outlet tube,
through the check valve and into the air tank. Useable
Check valve:
inside the air tank.
-