Table of Contents
Advertisement
2. In the SmartTings app,Tap the menu
3. Tap the Hub
4. Tap Z-Wave Utilities
5. Tap Include or Exclude Hub from an Existing Z-Wave Network
6. Tap OK
This will start learn mode on the Hub. It may take longer to receive all the network
info and load all the devices. Check the other controller for confirmation of whether
the transfer was successful.
Depending on the other controller, it may not have transferred the primary controller
role to the SmartThings Hub, and the Hub may not be able to add new devices. To
remove the Hub from the other network and reset it to default, follow the same steps
above, but put the other controller in remove or exclude mode instead.
Advertisement
Table of Contents
