Page 24
The cleaning cartridge contains a highly fl ammable liquid so keep it away from sources of ignition. Do not smoke near the station. Do not expose to direct sunlight for long periods of time. Do not refi ll the cartridge and use only original Braun refi ll cartridges.
Page 25
Description Clean&Renew station Cleaning fl uid display Lift button for cartridge exchange Station-to-shaver contacts Start button Fast clean button Cleaning program indicators Station power socket Cleaning cartridge Shaver Foil & Cutter cassette Cassette release button Shaver head «lock» switch Pop-out long hair trimmer On/off switch (–) setting button (sensitive) (+) setting button (intensive)
Page 26
Charging and cleaning the shaver Insert the shaver head with the front showing and released head lock into the Clean&Renew. The contacts on the back of the shaver will align with the contacts in the cleaning station. Important: The shaver needs to be dry! If required, the Clean&Renew station will auto- matically charge the shaver.
Shaver display The shaver display shows the charge status of the battery. During charging or when using the shaver, the respective green charge status will blink. When the battery is fully charged the green charge status will light up continously, provided the shaver is connected to an electrical outlet.
Page 28
• To trim sideburns, moustache or beard, slide the pop-out long hair trimmer upwards. Tips for the perfect dry shave For best shaving results, Braun recommends you follow 3 simple steps: 1. Always shave before washing your face. 2. At all times, hold the shaver at right angles (90°) to your skin.
Page 29
This may result in the battery running out faster than normal. Even if this happens – indicated by low charge indicator lighting up earlier, your Braun shaver will run for at least 5 more minutes enabling you to complete your current shave.
While doing so, the replacement light blinks and goes off when the reset is complete. The manual reset can be done at any time. Accessories Available at your dealer or Braun Service Centres: 70S/70B • Foil & Cutter cassette 70S/70B •...
Trouble-Shooting Problem: Possible reason: Remedy: SHAVER Unpleasant 1. Shaver head is 1. When cleaning the shaver head smell from the cleaned with water. with water only use hot water shaver head. 2. Cleaning cartridge is and from time to time some in use for more than liquid soap (without abrasive 8 weeks.
Page 32
CLEAN&RENEW STATION Shaving system 1. Drain of the 1. Clean the drain with a wooden is still wet Clean&Renew station toothpick. Regularly wipe the after cleaning is clogged. tub clean. program 2. Cleaning cartridge 2. The alcohol proportion has has been has been used for decreased while the oil completed.
Need help?
Do you have a question about the 760cc-7 and is the answer not in the manual?
Questions and answers