GE 750 UL S2 User Manual page 4

Congratulations on your choice of a SG Series Uninterruptible Power Supply (UPS). It will
help eliminate Load disturbances due to unexpected power problems.
This Manual describes the function of the UPS module, the purpose and location of the
switches, the meaning of the system events related to the front panel indication, and
provides procedures for starting and stopping the equipment.
Please refer to the accompanying Installations Guide, which describes how to prepare the
installation site, and it provides weight, dimensions and procedures for moving, installing
and connecting the UPS.
While every care has been taken to ensure the completeness and accuracy of this manual,
GE assumes no responsibility or liability for any losses or damages resulting from the use
of the information contained in this document.
NOTE !
SG Series 750 & SG Series 750 T12 are a product that needs to be installed by a licensed
and knowledgeable contractor.
We recommend that this manual be kept next to the UPS for future references.
If any problems are encountered with the procedures contained in this manual, please
contact your Service Center before you proceed.
This document shall not be copied or reproduced without the permission of GE.
Some of the information contained in this manual may be changed without notice to
reflect technical improvements.
Read the safety instructions contained on the following pages carefully before the
installation of the UPS, options and Battery System.
Pay attention to the rectangular boxes included in the text:
They contain important information and warning concerning electrical connections and
personnel safety.
Modifications reserved
OPM_SGS_USM_M75_M75_2US_V010.doc
Preface
Safety instructions
Parallel version secured with RPA
When included in the text, this symbol refers to operation needed
only for parallel system.
User Manual SG Series 750 UL S2 & SG Series 750 T12 UL S2
Page 4/71