Table of Contents
Advertisement
❸
Wait 2 minutes for the camera to boot up and connect
to the Internet. The LED will be solid green when this
process is complete.
❹
Add the device to the account by either selecting the
account in MobileTech or by using a web browser
and entering the following URL: www.alarm.com/addcamera
(you will need the customer username and password).
❺
Select the camera from the video device list or enter
its MAC address to begin adding the camera.
The camera's MAC address is located on the bottom
of the device or on the packaging.
❻
Follow the on-screen instructions to finish adding the camera.
You can now power down the camera and install it in its
final location using the included hardware. You may configure
camera settings from the Customer Website.
6
LED reference
Not illuminated - Power off
Solid green - Connected to Alarm.com
Blinking green - Local network connection
Blinking green and red - Reverting to factory default settings
Blinking red - Power on, camera booting
Solid red - No local or Internet connection
7
7
Advertisement
Table of Contents
Need help?
Do you have a question about the ADC-VC847PF and is the answer not in the manual?
Questions and answers