Related Manuals for Aurora AU1210MA
Summary of Contents for Aurora AU1210MA
- Page 1 Shredder User Manual 1-800-327-8508 USA Only 1-310-793-5650 International Email: info@auroracorp.com For more information, please visit us at: AU1210MA www.auroracorp.com Please read these operating instructions before using the unit. Model No.
- Page 3 WARNING : SAFETY INSTRUCTIONS, READ BEFORE USING! Read instructions before use. Do not spray or keep any aerosol products in or around the shredder. Avoid touching the document Keep loose clothing or jewelry feed opening with hands. away from the paper entry slot. Product is not intended for use by Avoid getting hair near the children (product is not a toy).
-
Page 4: Installation
Paper Shredder Sheet Capacity 12 Sheets of 20 lb. bond paper* Operating Instructions 0.16 in. x 0.47 in. pieces Installation Paper Shred Size 0.4 cm x 1.2 cm pieces Operation Paper Entry Width 8.7 in / 220 mm Maintenance Troubleshooting CD/Credit Card Capacity 1 at a time Service Center Duty Cycle... -
Page 5: Operation
OPERATION Control Switch Using the switch located on the unit, select one of the following FIGURE 2 settings by sliding the switch either left or right. (FIGURE 2) Auto / On: This setting allows the shredder to be automatically started by inserting paper into the feed slot. - Page 6 OPERATION Paper / Credit Card / CDs Entry: Auto Reverse Technology When the shredder detects over-capacity shredding, the motor will immedi- ately stop and reject paper before actual shredding begins. Make sure you do not exceed sheet Insert one credit card at a time into the middle of the feed slot.
- Page 7 OPERATION • Overload: The Red LED light indicates when too much paper is inserted. Use the "Reverse" mode to back up and reduce number of sheets. • Door Open: The Red LED light indicates the shredder basket is not pushed in properly. Shredders with pull-out wastebaskets feature a safety power cut off upon bin removal.
-
Page 8: Maintenance
MAINTENANCE Warning: Failure to properly maintain your shredder will void the warranty. Oil the shredder blades every month with basic vegetable, cooking oil or shredder oil. Follow oiling procedure below (FIGURE 3). It helps to keep the shredder blades operating well over many years of use. Oiling procedure: 1. Turn off shredder. 2. -
Page 9: Troubleshooting
TROUBLESHOOTING If there is a problem with your shredder, check below for the symptoms and steps to resolve. If you continue to have problems, contact customer support at our Service Center 1-800-327-8508. DO NOT ATTEMPT TO REPAIR BY OPENING THE SHREDDER HEAD. This will completely void the product warranty. - Page 10 TROUBLESHOOTING stock (old greeting card or folded file folder) can be fed into the shredder to help push the jammed paper through. Power switch in auto position Use thick paper stock or greeting card to push the jam through The shredder is constantly running while in “Auto (On)” mode. 1) It is possible that the activation sensor, which starts the shredder, has become blocked with paper. Insert an index card or any rigid sheet of cardstock (old greeting card or folded file folder), directly in the center of the feed slot, while applying force to help push the jammed paper through.
-
Page 11: Service Center
SERVICE CENTER If you have any questions in regards to the operation of this shredder or in need of a spare part, please contact our service center at: Telephone: 1-800-327-8508 (U.S.A. only) or 1-310-793-5650 (International) Business hours: Monday to Friday 8:00 am - 5:00 pm PST (Pacific Standard Time) Email: info@auroracorp.com Or for more information, please visit our website at http://www.auroracorp.com LIMITED PRODUCT WARRANTY... - Page 12 1-800-327-8508 USA Only • 310-793-5650 International • Email: info@auroracorp.com • For more information, please visit us at: www.auroracorp.com © 2017 Aurora Corp. of America 3500 Challenger Street, Torrance, CA 90503 USA 110417...
Need help?
Do you have a question about the AU1210MA and is the answer not in the manual?
Questions and answers
Had a small paper jam - removed paper - now no power indicator light - outlet good - basket in properly - shredder does not operate or show power or any indicator light. What's left to do?