Table of Contents
Advertisement
PicoVNA Programmer's Guide
2
Programming with PicoVNA
The diagram below shows the steps to carry out a measurement. It is simplified and incorporates the minimum
number of steps to perform a measurement.
2.1
Installing the software
1. Download the latest PicoVNA software installer from www.picotech.com/downloads:
Use the PicoVNA 2 software for the PicoVNA 106 6 GHz VNA
Use the PicoVNA 3 software for the PicoVNA 108 8.5 GHz VNA
2. Run the installer.
3. In case of difficulty, please consult the
The control library is a 32-bit Windows COM DLL:
PicoControl2.dll
PicoControl3.dll
Installation of the PicoVNA 2 or 3 software automatically installs and registers the relevant COM class on the PC:
PicoControl2.PicoVNA_2
PicoControl3.PicoVNA_3
pvpg-4
PicoVNA Quick Start Guide
is supplied with the PicoVNA 2 software
is supplied with the PicoVNA 3 software
for the PicoVNA 2 software
for the PicoVNA 3 software
Copyright © 2017–2021 Pico Technology Ltd. All rights reserved.
Programming with PicoVNA
for further help.
7
Advertisement
Table of Contents
Need help?
Do you have a question about the PicoVNA 106 and is the answer not in the manual?
Questions and answers