Table of Contents
Advertisement
Online Activity LED
(green)
On
On
Flashing regularly (1 Hz) Amber flashing regularly
Flashing regularly (1 Hz) Off
Flashing irregularly
Flashing irregularly
Off
Off
Off
1 Gbit ethernet port LEDs
The 1 Gbit ethernet LAN ports have two LEDs on the rear of the HPE StoreOnce Backup system.
68
1 Gbit ethernet port LEDs
Fault/UID LED (amber/
blue)
Amber flashing regularly
Off
Amber flashing regularly (1
Hz)
Off
Off
Amber flashing regularly
Off
Interpretation
A predictive failure alert has been received for
this drive. Replace the drive as soon as
possible.
The drive is online, but it is not currently active.
Do not remove the drive. Removing a drive
may terminate the current operation and
cause data loss.
The drive is part of an array that is undergoing
capacity expansion or a stripe size migration,
but a predictive failure alert has been received
for this drive. To minimize the risk of data loss,
do not replace the drive until the expansion or
migration is complete.
Do not remove the drive. Removing a drive
may terminate the current operation and
cause data loss.
The drive is rebuilding, or it is part of an array
that is undergoing array expansion, logical
drive extension, a stripe size migration, or RAID
migration.
The drive is active, but a predictive failure alert
has been received for this drive. Replace the
drive as soon as possible.
The drive is active and it is operating normally.
A critical fault condition has been identified for
this drive and the controller has placed it offline.
Replace the drive as soon as possible.
A predictive failure alert has been received for
this drive. Replace the drive as soon as
possible.
The drive is offline, a spare, or not configured
as part of an array.
Advertisement
Table of Contents
