Sealey 3001CXP Manual

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to Wear safety
instructions footwear
1. SAFETY
IMPORTANT SAFETY WARNING: ALWAYS USE AXLE STANDS
Please remember a trolley jack is a lifting device and is not designed to support a load. Never get
9
underneath a vehicle supported only by a jack - your life is at risk. We stock a comprehensive range
of axle stands - please see relative section for full details.
Ensure the jack is in sound condition and good working order. Take action for immediate repair or
9
replacement of damaged parts. Use genuine parts only. The use of improper parts may be dangerous
and will invalidate the warranty.
Locate the jack in a suitable, well lit working area. Keep working area clean and tidy and free from
9
unrelated materials.
Use jack on level/solid ground, preferably concrete. Avoid tarmacadam as jack may sink in.
9
Place wedges under wheels of vehicle, but ensure the jack wheels are free to move and that there are
9
no obstructions.
Ensure the vehicle handbrake is engaged, engine is switched off and transmission is in gear (or "PARK"
9
if automatic).
Ensure minimum distance of 0.5m between vehicle and static objects such as doors, walls, etc., to
9
allow for vehicle tilting.
Ensure there are no passengers in the vehicle and that all non-essential persons keep a safe distance
9
whilst the jack is in use.
Place jack under lifting points recommended by vehicle manufacturer (see vehicle hand book). Ensure
9
lifting point is stable and centred on saddle.
▲ DANGER: Use the jack for lifting only, NOT for supporting the lifted load.
Use suitable capacity axle stands under the vehicle before proceeding with any task.
9
Ensure there are no persons or obstructions beneath the vehicle before lowering.
9
DO NOT operate the jack if damaged.
8
DO NOT work under the vehicle until axle stands have been correctly positioned.
8
DO NOT exceed the rated capacity of the jack (3tonne/3000kg). When lifting a load of maximum
8
capacity or close to it, it is recommended that the effort be reduced by the use of assistance during this
operation.
DO NOT adjust the safety overload valve.
8
DO NOT jack vehicle if there is a risk of spillage of fuel, battery acid, or other dangerous substances.
8
DO NOT allow the vehicle to move while supported by the jack, or use the jack to move the vehicle.
8
DO NOT top up hydraulic system with brake fluid. Use hydraulic jack oil only and use a qualified person
8
to maintain jack hydraulic system.
DO NOT allow untrained persons to operate the jack.
8
DO NOT use jack for purposes other than which it is designed.
8
DO NOT allow persons to ride on the jack.
8
When not in use store jack, fully lowered, in a safe, dry, childproof area.
9
2. INTRODUCTION
Single-piece hydraulic unit with heavy base design. Foot pedal as fast
lifting alternative method of raising saddle, especially useful in restricted
spaces. Universal joint release mechanism and long two-piece handle.
Heavy-duty castors and extra-large saddle design ease positioning
under vehicle. Fitted with safety overload valve and pump-through valve
to prevent handle locking at maximum ram extension. Ideal for loaded
vans up to 3.5tonne GVW.
© Jack Sealey Limited
TROLLEY JACK 3TONNE WITH FOOT PEDAL
3001CXP
MODEL NO:
Original Language Version 3001CXP Issue 1 29/07/19