HP EliteDesk 800 G3 SFF Hardware Reference Manual page 14

Removing the front bezel
1. Remove/disengage any security devices that prohibit opening the computer.
2. Remove all removable media, such as compact discs or USB flash drives, from the computer.
3. Turn off the computer properly through the operating system, and turn off any external devices.
4. Disconnect the power cord from the AC outlet and disconnect any external devices.
IMPORTANT:
as the system is plugged into an active AC outlet. To prevent damage to internal components, you must
disconnect the power cord from the power source before opening the computer.
5. If the computer is on a stand, remove the computer from the stand and lay the computer down.
6. Remove the computer access panel. See
7. Lift up the three tabs on the top of the bezel (1), and then rotate the bezel off the chassis (2).
8 Chapter 2 Hardware upgrades
Regardless of the power-on state, voltage is always present on the system board as long
Removing the computer access panel on page 6.