BINNUNE BW02 - Wireless Gaming Headset Manual

PACKAGE CONTENTS

BINNUNE BW02 Wireless Gaming Headse

2.4G Wireless Transmitter

User Manual 3.5mm

Audio Cable

USB Type-c Charging Cable

ENGINE REQUIREMENTS

Platforms:
Windows 7 - Windows 10
Mac OS X 10.8 - 10.11

Product overview

2. Soft Memory Protein Ear Cushions
3. Unidirectional Microphone
4. Mic Mute Button
5. 4G Wireless Transmitter
6. 5mm Audio Cable
7. USB Type-c Charging Cable
8. Master Volume Wheel
9. Power Button
10. 5mm Audio Port
11. USB Type-c Charging port

Setup

Using with PC/Mac in Wireless Mode

1. 0pen Sound settings
2. Choose your output device BW02
3. Choose your input device 'BW02'
4. BW02 wireless headset can be used.

Using with PS4/PS5 Controller in Wired Mode

Using with PS4/PS5 Console in Wireless Mode

Route: Settings→Devices →Audio Devices
Set 'BW02' as Input Device & Output Device

Using with Xbox Controller in Wired Mode

Note: Wireless mode is not available for Xbox.

Specifications

Model BWO02

Headset battery capacity lithium battery 3.7V/1500mA

Working time about 17 hours(70%volume)

Charging time oo about 4 hours

Standby time about 200 hours

Input charging standard USB Type-C,DC5V/1A

Frequency response 20Hz - 20KHz

Sensitivity 100+3dB@1KHz

MIC sensitivity 738+3dB@1KHz(Unidirectional)

Wireless Range Up to 32 feet

Power ON/OFF

MIC ON/OFF

On: Microphone On
Off: Microphone Off

Note: On the wired mode, the microphone mute function does not work.

Note

1. If your headset is disconnected from your devices and no operation is performed for five minutes, your headset wil turn off automatically.
2. Insert the 3.5mm audio cable, then the headset turns off and enters the wired mode.
3. Low Battery Reminder: When you hear the low battery tone 'battery low' and the red light flashes, please charge the headset in time.

Trouble shooting

8 2.4GHz wireless
The 2.4GHz connection is available on Windows / Mac/PS4/PS5.

Charging and Working Time

1. Please charge the headset with 5V/1A standard adapter or via the USB port of PC;
2. Generally, it takes 4 hours to fully charge the headset, but. actual the charging time may vary according to different charging devices;
3. Up to17 hours working time (at 70% volume) after fully charged.

The Microphone can not Work

Wireless mode:

1. Check whether you've set the headset as the default recording device;
2. Check if the microphone as been turned off.

Wired mode:

1. Make sure the line-in cable has been connected tightly;
2. please use a converter cable while connecting with PC.

No Sound or Intermittent Sound from the Headset

1. Check if there are other obstacles which affect the transmitter;
2. If intermittent sound occurs when you are communicating, check whether the network of your device works smoothly;
3. Check whether you've set the headset as the default recording debvice;
4. Check whether the headset is in lowest volume setting.

Can't Connect to Devices

1. Check whether you used a USB Extension Cable or USB Hub It is not recommended.
2. Plug directly into the USB jack of the devices host.
3. Try to Replace a USB jack.(Some USB jacks may be power shortage)
4. For PC, it is recommended to plug into the USB jack at the back of the host.

We can't meet all our customers' expectations, but we try to meet it.
www.binnunetech.com
support@binnune.com

Support

Documents / Resources

References

• 江南体育登录入口-官方登录

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download BINNUNE BW02 - Wireless Gaming Headset Manual