Motorola APX 7000 User Manual page 86

Conventional
and
Broadband
Turning On the LTE with LTE Button
Press and hold the preprogrammed LTE button.
The display shows LTE ON to indicate radio is
initating the LTE connection.
The display shows LTE CNTD once the radio is
connected.
82
English
LTE is not available or turned off,
the radio falls back to using IV&D
LMR data, if available. Once LTE
coverage becomes available
again, the radio reverts back to
using LTE data transmission
network.
Use LTE data transmission
network when available. When
LTE is not available or turned off,
the radio falls back to using
Conventional LMR data, if
available. Once LTE coverage
becomes available again, the radio
reverts back to using LTE data
transmission network.
If there is an encryption error, the display shows LTE
SVC alternating with ERROR.
If there are no LTE networks available, the display
shows No LTE alternating with SERVICE.
Note:
It is advisable to turn off the LTE if the radio
prompts LTE service error or No LTE
service. For the error no LTE service
available, turn on the LTE after you moved to
another site to check the availablity.
Turning Off the LTE Connection
To extend the radio battery life, disable the LTE
Connection when radio is out of LTE coverage.
Press and hold the preprogrammed LTE button.
The display shows LTE OFF to indicate the LTE
connection is off.
Viewing the LTE Status
Here are the definitions of the temporary statuses of
the LTE which are shown on the radio top display.